Product Description:DMT132 is a highly cost-effective dew point measurement tool, suitable for verifying the functionality of freeze-dryers. It is particularly ideal for OEM drying machine manufacturers. The demand for validating cold dryers with dew point sensors is on the rise. Direct dew point measurement can save energy and enhance efficiency. Within the measurement range of freeze-dryers, it boasts a high accuracy of ±1°C (±1.8°F). Low power consumption is required...
Dew Point Measurement | |||
| Dew Point Range | -20 ... +50 °C (-4 ... +122 °F) Td | ||
| Accuracy, (+20 °C (+68 °F)) | Within the range of -3...20 °C (+26.6...+68 °F) for Td, ±1 °C Within the range of -15...-3 °C (-5...+26.6 °F), ±2 °C | ||
Sensor | Vaisala HUMICAP® 180R | ||
Work Environment | |||
| Operating Temperature Work pressure Relative Humidity Air Flow Rate Tested Gas | -10 ... + 60 °C (+14 ... +140 °F) 0 ... 20 bar 0 ... 100 %RH No effect on measurement accuracy Non-corrosive gas | ||
Output | |||
| Simulated Output (Expandable) Current Output Resolution Simulated Output Accuracy +20 °C | 4...20 mA, 2-wire 0.002 mA ±0.05% Full Range | ||
| Typical Temperature Characteristics Data connection port | ±0.005% Full Range/ °C 4-Pin M8 (IEC 60947-5-2) | ||
General Parameters | |||
| Suggested calibration cycle (For freezer dryer applications) Mechanical installation interface Working Voltage External Load | 2 years G 1/2" ISO 10 .... 28 VDC | ||
| Weight Outer Shell Material Shell protection grade Storage temperature range Launch Time | 65g (2.3oz) PPS + 40% GF (Reinforced Plastic) IP65 (NEMA 4) -40 ... + 80 °C (-40 ... +176 °F) 3 s | ||
Options and Attachments | |||
Tubular filter | 230602 | ||
