Lifting Vehicles are mobile platforms equipped with a lifting mechanism, primarily used for outdoor wiring and streetlight maintenance. Equipped with a drive unit, these vehicles utilize the car's own power to operate the lifting function, allowing for normal operation even without an external power source.
Lift Truck Rentals - Due to the safety, cost-saving on labor, and wide operational range of lift trucks, their market acceptance has gradually increased in recent years. With the widespread use of lift trucks, to ensure safe driving, operators should pay attention to the following details during operation:
1. Users of the lift truck must obtain the corresponding qualification before they can operate the vehicle.
2. Prior to operation, ensure all safety measures are in place, confirm all actions are safe, the lift vehicle can rise and lower naturally without any anomalies. For telescopic, articulated, and spider vehicles, also verify that all support legs are securely stabilized.
3. Strictly control the lifting and lowering vehicle load within the safe range and strictly prohibit overloading. After the lifting and lowering vehicle is used, it should be cleaned up promptly and parked in the designated area.
4. Regular maintenance and care should be conducted, along with timely charging and oil changes. Each user should carefully record and understand the vehicle's operational status.
Operate the lift vehicle according to the above procedures to maximize its function throughout its use period, paving the way for smooth progress of various projects and tasks. Additionally, this ensures the lift vehicle coordinates better with the workers' various activities.

Benefits of Elevating Vehicle Rental and Operation:
1. The arm lift truck has minimal space constraints, allowing for flexible operations even in narrow high-rise buildings.
2. Due to the boom lift's working range typically being between 14-58 meters, it offers a broad height working range. Additionally, height adjustments can be made without consuming much time, making it convenient and quick.
3. On a flat surface, the boom lift's operational range is wider, with a larger operational area.
4. Each scissor lift comes equipped with a safety chain, ensuring complete safety during high-altitude operations.

Lift Truck Rental, Lift Truck Operation Manual:
1. Upon arrival at the work site, select a parking spot, secure the vehicle by pulling the brake handle, set the car's transmission to neutral, engage the power take-off gear, and let the oil pump run for over ten minutes to increase the hydraulic oil temperature.
2. Leg adjustment: Operate the leg pivot valve handle to ensure the legs are firmly on the ground. It's generally advisable to elevate the legs no more than 30-40mm.
3. Arm Operation: Control the up and down movement of the arm handle and the on-board rotation handle to position the work bucket at the desired working location.
4. Lifting Platform Operation Completed: Alternate the upper and lower arms to descend and reset, fold the support legs, disconnect the drive box shift, stop the oil pump, release the hand brake, the vehicle can then shift gears and drive to the next work position. Both the upper and lower working arms are welded box-shaped structures; the upper arm overlaps the lower arm, with the upper arm being a variable cross-section rod and the lower arm being a uniform cross-section rod. According to the structure and load requirements, longitudinal and transverse reinforcing plates or ribs are added at different positions. The upper arm is lifted and lowered by the lifting cylinder, and the lower arm is tilted by the variable amplitude cylinder. The working range can be freely adjusted within the allowable limits.

Lift Truck Rental, Safety Operating Procedures for Lift Trucks
1. Elevators should be regularly inspected to ensure smooth up and down movement of the lifting frame, screws are secure, and the wire ropes are free from rust, short strands, etc., with good lubrication.
2. When using the lift truck, the stabilizer legs must be engaged, ensure their stability, and the truck wheels should be elevated off the ground to prevent the lift truck from sliding autonomously.
3. The lift truck should be placed on a level surface. If the ground is uneven, the body of the truck should be leveled with supports. It is not allowed to use the lift truck on steep slopes.
4. Workers on the lift truck's roof must operate within the guardrail; they are not allowed to straddle the guardrail or work standing on it.
5. No ladders or other elevated items are allowed to be placed on the top platform of the lift. When staff are working by extending their bodies, both feet must remain on the ground; otherwise, the lift should be moved.
6. When the lift vehicle is elevated, maintain the required safe distance from overhead power lines. For those responsible for manual lifting, during operation, their face should be positioned to the side of the steel wire rope to prevent danger in case of sudden rope breakage. Prohibit the use of electric lifting vehicles outdoors during rainy weather.
7. Ensure the electric lift truck is properly grounded, with the protective sheath of the power cord intact and the copper wire not exposed; adequate protection measures should be taken when the power cord crosses the road horizontally.
8. When staff on the lift platform pass tools or materials up and down, they must not throw them; instead, use a rope to hoist them. Workers on the platform should prevent tools or materials from falling and injuring pedestrians.
Our company adheres to the business philosophy of "Customer First, Service as the Core," serving a wide range of customers with the operational concept of "honest cooperation and trust-based management."