Seamless Pipe Cutting Machine, Electric Hydraulic Pipe Cutting Machine for Coal Mine Pipeline Construction, Tube Rolling Cutting Machine

Seamless Steel Pipe Cutting Machine, Coal Mine Pipeline Construction Electric Hydraulic Pipe Cutting Machine, Tube Rolling Cutting Machine

Sales Phone: 18905377135, Manager Li

Basic Uses and Models of Tube Cutting Machines:

Cutting machines are used for galvanized steel pipes, plastic-lined pipes, spiral pipes, and uncoated pipes.Pipe cutting for steel pipes, used in pipeline construction and water supply treatment for fire protection, construction, water supply mining, coal mines, etc.Cutting Machine Usage and Precautions: Place the cutting machine on a level surface and adjust according to the diameter of the tube.Adjust the bracket height slightly. If the pipe is too heavy, it's recommended to directly install bolts into the foundation to secure the cutting of the pipe.Machine to prevent the pipe cutting machine from moving during the cutting process. Place the steel pipe in the pipe cutting machine according to the thickness of the steel pipe.on the different rollers (tubes 100mm and under should be placed on the two rollers inside the cutting machine)Do not continuously press the handle of the slow-down oil pump. Press the handle once, and the blade will move downward approximately 0.5mm.Rotate the steel pipe once, then press. When the blade is about 1/2 more into the steel pipe, no further pressing is needed.After allowing the steel pipe to rotate a few times, it naturally breaks.