Bridge Deck Triangular Chisel Machine, Push-Type Chisel Machine, Rock Drilling Air Hammer

Bridge Deck Tri-Arm Chisel Machine, Push-Type Chisel Machine, Rock Drill Pneumatic Hammer

Sales Phone: 189-0537-7135  Manager Li

A planing machine is a tool used to treat the finished surface of the main structure, ensuring a strong bond between the construction surfaces of two construction stages.Bane AxeThe tool. Typically, shotblasting machines are used in cast-in-place concrete structures. After the casting of the slabs is completed, shotblasting is performed to ensure bonding for the next layer of pouring. Hence, the "shotblasting machine" is also commonly referred to as the "concrete shotblasting machine."
Cavitation Machine Application Range:
Waterproofing treatment and roughening of the deck for high-speed railway box girder (precast girder).
Chipping the concrete on the 2 bridge sides, end faces, beam sides, and end faces.
Remove ground coatings, paint, and various traffic markings.
Clean and remove airport road markings, runway tire braking marks, etc., to regain a rough surface with a high coefficient of friction.
Surface treatment for 5 sets of cement asphalt road surfaces, highway bridge decks, bridge misalignments, and wear-resistant epoxy resin floors.
6 Road micro-surfacing construction, to abrade and remove the existing old pavement surface, preparing for the slurry seal layer.