(1) Maintenance and care for the vehicle undercarriage and associated pumps should be performed according to the corresponding user manual. (2) Before using the vehicle, it should be broken in according to the vehicle's user manual. (3) Lubrication system maintenance: The vehicle should be cleaned and maintained every 5,000 to 10,000 km of operation, or when encountering excessive engine noise, lack of acceleration, or high water temperature, as per the Guangxi High-pressure Cleaning Vehicle instructions. Cleaning the engine's internal oil sludge and other deposits can prevent oxidation thickening of the engine oil at high temperatures, effectively reducing engine component wear, thereby extending engine life and enhancing engine power. (4) Cooling system maintenance: The vehicle should be cleaned and maintained once during seasonal changes in winter and summer. It is recommended to clean and maintain every 6 to 8 months during normal operation, or when experiencing high water temperature, leakage, or boiling, as per the Guangxi High-pressure Cleaning Vehicle instructions. Cleaning away traces of overheating and scale can prevent harmful corrosion, avoid and stop leaks in seals and radiators, and completely replace old coolant. (5) Fuel system maintenance: The vehicle should be cleaned and maintained every 800 to 1,000 km of operation, or when noticing engine hesitation, poor acceleration, black smoke, weakness, or increased fuel consumption, as per the Guangxi High-pressure Cleaning Vehicle instructions. Cleaning the system's internal gaskets and carbon deposits can prevent harmful corrosion, avoid and stop leaks in seals and radiators, and completely replace old coolant. What should be noted when using high-pressure cleaning vehicles?

1. Equipped with a power take-off unit, high-pressure water pump, high-pressure water hose, vacuum sludge pump, for cleaning and suction; 2. Tank dimensions: (Length of straight section × Diameter) (mm): 5400×2150, the tank is divided into two parts: the front section is a clean water tank, length of straight section (mm): 2380; the rear section is a wastewater tank, length of straight section (mm): 3020; the effective volume of the water tank: 7.98 cubic meters, the effective volume of the suction tank: 9.98 cubic meters, the water tank and the suction tank are two separate tanks, which cannot be fully loaded simultaneously, the tank is liftable; 3. Overall length/forward overhang/axle distance/rear overhang: (mm): 10100/1250 (1450, 1410)/4350+1350/3150 (2950, 2990), 10100/1250 (1450, 1410)/4750+1350/2750 (2550, 2590); 4. Side and rear protective device material: Q235A carbon steel, both side and rear protection are welded, the cross-sectional size of the rear protective device (mm): 50×280, the height of the rear protective device from the ground: 470mm; 5. Optional cab with chassis, optional attachment installation location; 6. ABS model and manufacturer: 3631010-C2000/Dongke Konel Commercial Vehicle Braking System ( Shiyan ) Co., Ltd., J ABS/Jiaozuo Borike Control Technology Co., Ltd.; 7. Optional vehicle rear view. How much is a 18 cubic meter high-pressure cleaning truck in Henan?

Water tankers equipped with high-pressure water pumps, used for cleaning sediment in urban sewers and unblocking drains. They can also be used for cleaning industrial effluent pipelines, walls, and can serve as fire-fighting, water transportation, and road flushing vehicles in emergencies. The principle of the cleaning vehicle is to rotate a flexible, bendable steel wire into the blocked drain pipe to remove debris like rags and hair. There is also a tool called a "One-Shot Opener," a pressure疏通 tool that uses high-pressure principles to clear blocked drain pipes. The principle of the common leather foot in daily life is similar, kicking open blocked pipes. The industrial pipeline疏通 equipment varies greatly due to the size of the pipes, with those below 100MM similar to residential drain疏通. High-pressure cleaning vehicles are assembled on the basis of a second-class original chassis, with the upper part being the tank body and equipped with a high-pressure water pump. Our company supplies various models of motorized three-wheeled vehicles and Dongfeng series cleaning vehicles. Manufacturers support customization, quality guaranteed, welcome to inquire and negotiate.

Offering a functional description: Spray Rack Cleaning Width (m): 2.5-3.5 Spray Rack Tilt Angle (°): ±30 High-pressure Cleaning Water Pressure (Mpa): 9 Water Flow Rate for Cleaning (L/min): 120 Spray Flow Rate (L/min): 120 Cleaning Width (m): ≥16 Water Flow Rate for Cleaning (L/min): 500-800 Water Gun Range (m): ≥38 1. The spray rack has a cleaning width of 2.5m-3.5m, with adjustable control. When the telescopic spray wand retracts, it achieves dual water stream reinforcement for enhanced cleaning, suitable for urban roads and squares. 2. Left and right angle sprays for cleaning curbs, guardrails, and sidewalks. 3. High-pressure jet cleaning. 4. Mist system for dust suppression, air humidity adjustment, and air disinfectant spraying. 5. Low-pressure rinsing and water sprinkling for cooling. 6. Unique front sprinkling and rear rinsing device. 7. Road marking cleaning mechanism; suitable for cleaning road markings. 8. Noise barrier cleaning mechanism; suitable for cleaning urban elevated road noise barriers. 9. Guardrail cleaning brush; suitable for cleaning highway and urban road guardrails. 10. Hydraulic lift platform; suitable for cleaning and maintaining high-rise facilities on urban roads and highways. 11. Snow plow; used for road snow removal. 12. Self-priming function, greenery irrigation, and auxiliary firefighting capabilities. 13. FAW Jiefang high-pressure cleaning truck and suction truck chassis configuration.

Five: Suction Truck Vacuum Pump Accessories: The hydraulic oil separated by the suction truck oil-water separator is reused as the lubricating oil for the suction truck vacuum pump. However, the separated water remains at the bottom of the tank, so it is necessary to drain the water after the suction truck is used. Failure to do so may cause internal burning in the pump. Overuse of hydraulic oil can reduce its lubricity and airtightness. Therefore, the hydraulic oil in the suction truck should be changed regularly. Six: Suction Truck Overflow Prevention Valve: The suction truck overflow prevention valve is installed to prevent wastewater from spilling into the vacuum pump when the tank is full. If the vacuum pump吸入 too much sludge, it can easily be damaged. Therefore, it is important to frequently check the condition of the overflow prevention valve during operation. Seven: Suction Truck Rear Tank Door: After long-term use, the internal components of the rear tank door clamp installation accumulate dirt, making it impossible to tighten the handwheel. Therefore, it should be disassembled and cleaned every six months, and it is recommended to add some lubricating grease at this time. It is also advisable to clean the sealing gasket of the rear tank door after operation. If there is a leakage, and no issues are found with the tightening mechanism, it may be necessary to replace the sealing gasket of the rear tank door of the suction truck, as the sealing gasket may lose its effectiveness over time. High-pressure Cleaning Suction Truck Price. Henan 18 Cubic Meter High-pressure Cleaning Tank Truck.

How much is a 12 cubic meter high-pressure cleaning truck? Description of high-pressure cleaning trucks in Guangxi.

Sewer Suction Truck Product Main Technical Parameters Product Name: Sewer Suction Truck Exterior Dimensions: 8000, 8550, 8750, 9050, 9350, 9650 × 2500 × 3300 (mm) Chassis Model: CLW5180GXE6 Body Dimensions: ×× (mm) Gross Weight: 18000 (Kg) Rated Weight: 9770, 9705 (Kg) Unladen Weight: 8100 (Kg) Maximum Speed: 105 (km/h) Emission Standard: GB3847-2005, GB17691-2018, China VI Chassis Parameters Chassis Model: EQ1185LJ9CDE Fuel Type: Diesel Axles: 2 Wheelbase: 3600, 3950, 4500, 4700, 5000, 5300, 5600, 3600 (mm) Tyre Count: 6 Axle Load: 6500/11500 Tyre Specifications: 295/80R22.5 18PR, 10.00R20 18PR, 275/80R22.5 18PR Engine Parameters Engine: Dongfeng Cummins Engine Co., Ltd. Displacement (ml): Power (kw) B6.2NS6B210D 4.5 NS6B220D 4.0 NS6B195YCS04200-68 CY4SK761 B6.2NS6B230YCY30165-60 Guangxi High-pressure Cleaning Truck Description

Chengli Special Vehicle Co., Ltd. has seen its development team continuously expand, now boasting a professional technical team equipped with various specialized equipment. Over the years of growth within the Chengli Group, the company now houses several brands, including Chengli. The company not only provides professional vehicles from Hubei Chengli Special Vehicle Co., Ltd., which specializes in the production and manufacturing of various special vehicles, but also sells complete vehicles and parts from large-scale manufacturers. Chengli has the authority to export independently, with its products dominating a significant share of the international market. The company's flagship products include water trucks, oil tankers, garbage trucks, suction trucks, waste sludge trucks, dump trucks, box trucks, semi-trailers, tow trucks, crane trucks,高空作业车, instructor vehicles, bulk cement trucks, chemical trucks, fire trucks, auto parts, cement mixer trucks, and towing trucks, encompassing eight series with over 100 different models. Additionally, we wholesale Dongfeng, Jiefang, and Chu Feng second-class chassis. We have also established a comprehensive after-sales service system, providing excellent products and services to our customers. Chengli Special Vehicle Co., Ltd. focuses on the main business of animal and poultry transport vehicles, water trucks, garbage trucks, oil tankers, adhering to the quality policy of "Guaranteed Quality, Excellent Service, Customer Satisfaction," and has earned the support and trust of a wide customer base.