ISAKER Aisha Brand Cabinet Lock Setting Instructions

A. Functions of various cards:

1. Set Cards (2): Permission Cards, used for configuring Open Cards and Guest Cards.

2. Emergency Open Cards (2 pieces): Used for opening any cabinet lock in case of an emergency.

3. Guest Card (1 piece): Used to unlock the corresponding cabinet.

B. Lock Fitting Card Steps:

Step 1: In the factory state, swipe card 1, and hear a 'beep' three times. This indicates that card 1 has been successfully paired and the lock has been activated.

Step 2: Swipe the Setup Card 1, during the blinking of the indicator light, continuously swipe the Setup Card, Open Card 1, Open Card 2, and Guest Card.

The LED light turns off indicating that the card has been successfully configured inside the lock.

C. Replace Customer Cards:

Swipe Card 1 or Card 2 during the blinking of the indicator light, refresh the guest card, and the indicator light will turn off to indicate the new guest card.

Effective, old customer cards will automatically expire.

D. Replacement Open Card

Swipe card 1 or card 2 during the blinking of the indicator light, and continuously swipe all open cards (up to a maximum of 2) during this period. Indicator light:

After extinguishing, it indicates that the card pairing was successful (unswiped cards will automatically become invalid).

E. Replacement Setting Card

Swipe any valid configuration card that is already set up in the lock during the blinking of the indicator light, then swipe a new configuration card.

The indicator light goes out, indicating that the new setup card has been successfully paired (at this point, the valid setup card within the lock is the one first swiped in this process).

That setup card and this new setup card).

F. Sound Prompt Description:

During normal use, after swiping the card, the lock emits different tones, which correspond to the following meanings:

1. After swiping the card, the lock makes a 'ding' sound once: This is the normal unlocking prompt for the cabinet.

2. After swiping the card, the lock makes a 'ding' sound twice: This indicates that the card has no permission to unlock this lock.

3. After swiping the card, the lock makes a 'beep' three times: This is the prompt sound during the card pairing process, indicating that the pairing was successful.

4. After swiping the guest card, the lock makes a 'ding' sound 4 times: indicating the guest card is in a non-unlocking state and cannot open the cabinet.

Lock.

5. After swiping the customer card, the lock emits a 'beep' 8 times: indicating low battery in the lock, please replace the battery promptly.

6. After swiping the guest card, the lock emits a 'Chrysanthemum' sound twice: indicating that this card is an unauthorized one from outside the venue.

7. After swiping the customer card, the lock emits a sound of 'Jue' five times: indicating the lock has been restricted from opening.

Please keep your setup card and access card secure.

Especially the setup card! In the event that all setup cards are lost, to reactivate a new setup card, you would need to disassemble the lock and use a duplicate.

Press the button to reset the lock to factory settings.