Estonian Electronic Lock Brand After-Sales Service, offering technical support and after-sales service, including installation methods, setup procedures, and usage debugging instructions.

Below is the card issuance cabinet lock card issuance instructions

(E8.5 Latest Version Setup Instructions)

A. Functions of various cards:

1. Set-up Cards (2 pieces): Permission Cards for configuring General Access Cards and Customer Cards.

2. Emergency Unlock Cards (2 pieces): For unlocking any cabinet lock in case of an emergency.

3. Guest Card (1): For unlocking the corresponding cabinet lock.

B. Lock Fitting Card Steps:

1. Step 1: In the factory condition, swipe card 1, and it will beep 3 times, indicating that card 1 has been successfully paired and the lock has been activated.

2. Step 2: Swipe Card 1 during the blinking indicator light, then continuously swipe Cards 2, 1 Open, 2 Open, and Customer Card.

The indicator light goes out, indicating that the card mentioned above has been successfully configured into the lock.

C. Replace Customer Card:

Swipe Card 1 or Card 2 during the blinking of the indicator light, refresh the guest card, and the indicator light will turn off to indicate the new guest card.

Effective immediately, old customer cards will automatically expire.

D. Replacement Open Card:

Swipe Card 1 or Card 2 during the blinking of the indicator light, and continuously swipe all open cards (up to a maximum of 2 cards), then the indicator light

After extinguishing, indicates that the card pairing is successful (unswiped cards automatically become invalid).

E. Replacement Setting Card:

Swipe any valid configuration card already set in the lock during the blinking of the indicator light, then swipe a new configuration card.

The indicator light goes out, indicating that this new setting card has been successfully paired (at this point, the valid setting card within the lock is the one first swiped in this process).

That setup card and this new setup card).

F. Sound Prompt Description:

During normal use, after swiping the card, the lock emits different beeps, with the corresponding meanings as follows:

1. After swiping the card, the lock emits a 'ding' sound once: This is the normal prompt sound for unlocking the cabinet.

2. After swiping the card, the lock makes a 'ding' sound twice: This card does not have permission to unlock this lock.

3. After swiping the card, the lock emits a 'ding' sound three times: This is the prompt sound during the card pairing process, indicating a successful pairing.

4. After swiping the guest card, the lock emits a 'beep' four times: indicating that the guest card is in a non-activation state and cannot open the cabinet.

Lock.

5. After swiping the customer card, the lock emits a 'beep' eight times: this indicates that the lock battery is low, please replace the battery promptly.

6. After swiping the guest card, the lock makes a 'Chrysanthemum' sound twice: indicating that this card is an illegal card not belonging to this venue.

7. After swiping the customer card, the lock emits 5 beeps: indicating the lock has been restricted from unlocking.

Please keep your setup card and access card secure.

Especially with the setup cards! Should all setup cards be lost, to reactivate new setup cards, you would need to disassemble the lock and reprogram it.

Press the button to reset the lock to factory settings.