SDJ-703 Vibration Transmitter Manufacturer Direct Sale

SDJ-703 Vibrating TransmitterPrimarily composed of a vibration speed sensor and a functional speed circuit section, this vibration transmitter features an integrated fixed installation design. It can be mounted externally on the housing in either a vertical or horizontal orientation, allowing for long-term monitoring of the vibration conditions of outdoor fans and indoor water pumps, among other equipment. The output current, DC 4-20mA, and switch signals are directly fed into the computer DCS system, greatly facilitating maintenance personnel in real-time machine operation monitoring. The vibration transmitter operates on a DC +24V power supply and uses a waterproof wiring connection, making installation simple. The unit is factory-calibrated and ready for use without any need for adjustment. To modify the reminder settings on-site, simply open the cover, press the set switch, adjust the potentiometer next to the switch until the red light illuminates, then observe it twice; green indicates normal measurement, while red indicates a reminder. This product is priced low, performs well, is easy to install, and is highly favored by users.

Technical Specifications

Shanghai Revolution Automation Technology Co., Ltd.

External Power Supply:

Direct Current Power Supply: +24VDC ±10%

Power Consumption: ＜2W

Input: Eddy Current Sensor Probe

Record Output Mode: 4~20mA (Load ≤ 500Ω)

Measurement Range: 0-500 µm

Reminder setting point: 2:00 p.m.

Relay Status: Normally Open

Remind Relay Output: 2 Sets of Normally Open Relays

Contact Rating: 250VAC/3A or 30VDC/3A

Reminder Delay: Selectable within 1~9 seconds

Accuracy:

Standard Output Error: 1%

Work Environment:

Operating Temperature: -20℃ to 70℃

     Storage Temperature: -30℃ to 85℃

     Relative Humidity: 20~95% non-condensing