Electrically heated boiler cleaning in Shandong Jining Sishui

Clean all types of heat exchangers, condensers, industrial pipelines, boilers, and steam power plant condensers. GlanChem Cooperation Ensures Protection

Jining Green Chemical Technology Co., Ltd. (Abbreviated as Jining Green)Green Clean CompanyEstablished2010YearIs industrialAll kinds ofHeat Exchanger EquipmentWashingNo Chinese content provided.ProfessionalCompany. The company hasComplete SetPhilosophy of operation, industrial equipment cleaningTechnologyOur R&D capabilities, acceptingIndustry, private enterprises,Industrial chemical equipment, power station equipment, power plant condenser, boiler, and boiler air preheater cleaning servicesAir conditioning cleaning, heat exchange equipment cleaning, handling cleaning for machinery and equipment, chemical equipment, etc.; undertaking cleaning of refrigeration equipment, heating equipment descaling.

Electrically heated boiler cleaning in Shandong Jining, Sishui

JiningGreene Cleaning Company stocks250mpaMultiple models of cleaning machines, dozens in total, and over a dozen chemical cleaning pump stations. Mainly serving enterprises such as power plants, chemical factories, oil refineries, food processing plants, public institutions, heating equipment, etc., the company also provides long-term services forIndustryCustomers perform cleaning and design of industrial heat exchangers.

Our company has newly acquired domestic cleaning machines and imported cleaning equipment. We have hired experienced professionals in the cleaning industry.Technical SpecialistStandardization and regularization have been achieved in the cleaning of heat exchange equipment.。

Electrically heated boiler cleaning in Jining, Shangxi, Shandong

Chemical Cleaning Scale Removal Process

Recirculating cleaning utilizes two existing parallel ash discharge pipelines to form a loop, creating a recirculation system with the cleaning pump station. It introduces a solution of a certain acidity concentration, allowing it to circulate and clean within the ash water pipes. As the acid washing process reaches a certain point, more acid solution is continuously added. For short-distance single ash water pipelines, if conditions permit, a temporary pipeline can be installed to form a recirculation loop for cleaning. This process must be carried out while the system is shut down, and it is complex and costly.

No two ash pipes can form a loop during cleaning; only single-pipe open circuit cleaning is allowed. The method involves connecting one end of the ash pipe to the cleaning unit, continuously preparing a specific concentration of cleaning solution in the fluid tank, and injecting it into the ash pipe continuously or intermittently. This process requires adding cleaning equipment while the system is shutdown, resulting in higher costs.

The process involves continuously injecting a specific amount of acidic solution while operating the ash conveying pipes, simultaneously introducing a certain quantity of ash conveying pipeline cleaning inhibitor and pipeline cleaning descaler. This is an open-circuit cleaning method. The primary role of the cleaning additive is to promote the reaction between the acidic solution and the ash scale at a certain concentration and flow rate, while also increasing its solubility in water, reducing the formation of gas blockages, and ensuring the quality of ash pipe cleaning.

High-pressure water jet cleaning offers high efficiency, low costs, non-damaging to workpieces, environmental friendliness, ease of operation, and safety.
High-pressure water technology boasts the following advantages.

Due to the pressure of high-pressure water being less than the compressive strength grade of metal, high-pressure cleaning will not damage the base material being cleaned.

Additionally, parts cleaned with high-pressure water jetting do not require secondary cleaning; however, after chemical cleaning, the surface chemical agents must be rinsed off with clean water.

(1) Classified by chemical composition, they can be categorized into carbonate scale, sulfate scale, silicate scale, and mixed scale, etc. The main components of carbonate scale are calcium carbonate and magnesium carbonate; the main components of sulfate scale and silicate scale are calcium sulfate and silicate compounds, respectively; mixed scale is usually a mixture of the above three types. Jinxiang Sishui, Shandong, Green Chemical Industry for electric heating boiler cleaning

Lime scale primarily forms due to the salts of calcium, magnesium, and other elements in the boiler feed water that precipitate and adhere to the metal surface upon heating. The thermal conductivity of lime scaleCorrosion intensifies, causing pipeline scale corrosion and accelerating the damage to heated surfaces. Once scale forms, it should be promptly removed using mechanical or chemical methods.
Heat Exchanger & Refrigeration Equipment Cleaning - Choose GreenChem for Reliability