Shanghai FCS Electric Roller Shades Price

Features

1. The system can be installed indoors or outdoors, and can also be mounted vertically on the exterior side of the window.

2. Its linkage driving method can accommodate electric sunshading for irregular roofs such as triangular and circular shapes.

3. Blade angles are adjustable for controlling indoor light.

4. Control Methods: Wireless remote control, manual control, and intelligent control; Outdoor use of intelligent control systems with sensors for sunlight, rain, and wind, making the sunshade system more intelligent, convenient, and safe.

Applied

Roof shading for laboratories, gardens, factories, and sports facilities.

Work Method

The system utilizes a tubular motor to rotate and drive the aluminum alloy coil roller, as the winch is directly fixed to the aluminum alloy coil.

On the coil, the winder rotates passively to wrap the tensioned steel wire already wrapped around it. Both ends of the tensioned steel wire are fixed on the same winder, with one end guided through a fixed pulley (the bottom of which has a tensioning spring to keep the wire taut), forming a loop. As it operates, the wire moves in a circular motion on the winder, one end unwinding and the other winding up. A guide wire is fixed above the fabric, with two typically used within a 2-meter width, and three required for widths exceeding 2 meters. The guide wires remain taut, and the sunshade fabric is hung from the fabric support rods onto the guide wires. The tensioned steel wire is fixedly connected to the frontmost fabric support rod, thereby driving the entire sunshade system. The system can be operated using switches, remote control, or intelligent control methods.

Relevant materials

【System Accessories】: The FCS ceiling curtain system roller tube typically uses a grooved round tube with a diameter of 63mm or 85mm, and the bracket is selected for high strength.

Galvanized steel sheets, with a nylon 66 material rope winder.

【Fabric Specifications】: The system has low requirements for sunshade fabric, offering a wide range of fabric choices, primarily in sun-protection materials.

【Technical Requirements】：It is recommended that the width of a single piece should not exceed 3m, and the tensile length should not exceed 12m; the system can be made into a one-drawn design.