Soft oil-resistant heat shrinkable tube
High-performance oil-resistant soft rubber heat shrinkable tube made of irradiated cross-linked special polymer, with excellent oil resistance(Aviation fuel, fuel oil, hydraulic oil, lubricating oil, etc.)Performance. Highly suitable for applications requiring oil, liquid, or solvent resistance, ideal for insulation or sheathing of high-performance cable assemblies.
Features·Contraction Ratio 2：1,·Excellent oil and heat resistance properties,·Reliable protection against wear and mechanical damage,Low temperature softness and good flame retardancy.,Chlorine-free compoundsPCBS、PCPSPolybrominated BiphenylsPBBsPolybrominated biphenyl ethersPBBOsPolybrominated Diphenyl EthersPBBEs、PBDEsHazardous substances, compliant with European standardsRoHSEnvironmental RegulationsSONY SS00259Standard environmental protection requirements.
Temperature Range,Continuous Operating Temperature:-75℃～150℃,zuiLow complete shrinkage temperature:175℃
Standard,AMS-DTL-23053/16
Performance Parameters
Features | Project | Specification requirements | Testing Method | Typical Value |
Physical Properties: | Tensile strength | 11.7MPa min. | ASTM D 638 | ≥14MPa |
Tensile elongation at break | 250% min. | ASTM D 638 | ≥350% | |
Thermal shock(250℃, 4Hour) | No cracks | ASTM D 2671 | Through | |
Low温柔软(-75℃, 4Hour) | Crack-free | ASTM D 2671 | Through | |
Heat aging 150℃, 168Hour | ||||
Tensile strength after aging | 10.3MPa min. | ASTM D 638 | ≥12MPa | |
Tensile elongation at break after aging | 200% min. | ASTM D 638 | ≥300% | |
Electrical Properties: | Insulation voltage resistance and breakdown | 2500V, 60sec, Not penetrate | ASTM D 2671 | Through |
Insulation Strength | 11.9KV/mm min. | ASTM D 2671 | ≥11.9KV/mm | |
Volume resistivity | 109Ω·cm min. | ASTM D 876 | ≥109Ω·.cm | |
Chemical Properties: | Corrosive(135℃, 16Hour) | Corrosion-free | ASTM D 2671 | Through |
Flame retardant | 60sSelf-extinguishing | ASTM D 2671 | Through | |
Oil-resistant properties: | 23℃，24Hourly (for gasoline, fuel oil, hydraulic oil, lubricants, etc.) | |||
Tensile strength | 10.4Mpa min. min. | ASTM D 2671 | ≥12MPa | |
Tensile elongation at break | 200% min. | ASTM D 2671 | ≥300% | |
Dielectric strength | 7.9KV/mm min. | ASTM D 2671 | ≥9.0KV/mm | |
n Specification and size mm/inch
Specs(inch) | Before Shrinking(mm) | Shrinkage after treatment(mm) | Standard Packagingm/Roll | ||
Inside Diameter(min) | Wall thickness(nominal) | Internal Diameter(max.) | Wall thickness | ||
1/8 | 3.2 | 0.40 | 1.6 | 0.76±0.15 | 100 |
3/16 | 4.8 | 0.45 | 2.4 | 0.84±0.15 | 100 |
1/4 | 6.4 | 0.50 | 3.2 | 0.89±0.15 | 100 |
3/8 | 9.5 | 0.55 | 4.8 | 1.02±0.20 | 50 |
1/2 | 12.7 | 0.60 | 6.4 | 1.22±0.20 | 30 |
3/4 | 19.1 | 0.70 | 9.5 | 1.45±0.28 | 30 |
1 | 25.4 | 0.85 | 12.7 | 1.78±0.28 | 30 |
1 1/2 | 38.1 | 1.10 | 19.1 | 2.41±0.41 | 15 |
2 | 50.8 | 1.30 | 25.4 | 2.79±0.41 | 22 |
n Order Information
·Standard Color: Black-BK）
·Non-standard sizes: Non-standard specification products available upon request
·Order Instructions: Specify product model, specifications, and color
