Anti-slip pattern heat shrinkable tube
Product Description
Anti-slip pattern heat shrinkable tubing is made from high-quality polymers, scientifically formulated and mechanically blended into a polymer alloy. The product is processed through extrusion molding, electron beam cross-linking, expansion molding, and surface treatment, boasting environmental friendliness, softness, anti-slip properties, aesthetic appearance, rapid shrinkage, and stable performance.
Easily shrinkable with the use of an oven or a hot air gun.
This product is a first in the domestic market.
Product Features:
Temperature Range Applicable:-55℃-105℃；
Initial shrinkage temperature:70°C, Full Contraction Temperature:110℃；
Radial shrinkage ratio:2:1, Vertical shrinkage rate ≦8%；
Stretchy, soft, and non-slip:10.4MPa,Tensile elongation at break200%；
The ring hot air gun and hot water heating can be contracted.
Product Applications
Widely applied in high-end fishing gear, sports equipment, fitness equipment, and daily necessities.
Product Specifications
Specs | Pre-shrinked size | Fully retracted dimensions | Packaging (per unit)/Paragraph | ||
Product Inside Diameter | Average Wall Thickness | Da Nei Jing | Average Wall Thickness | ||
Φ20 | ≧Φ20 | 0.55±0.15 | Φ10 | 1.1±0.15 | 0.8/1.0 |
Φ22 | ≧Φ22 | 0.55±0.15 | Φ11 | 1.1±0.15 | 0.8/1.0 |
Φ25 | ≧Φ25 | 0.70±0.15 | Φ12.5 | 1.3±0.15 | 0.8/1.0 |
Φ28 | ≧Φ28 | 0.70±0.15 | Φ14 | 1.3±0.15 | 0.8/1.0 |
Φ30 | ≧Φ30 | 0.70±0.15 | Φ15 | 1.3±0.15 | 0.8/1.0 |
Φ35 | ≧Φ35 | 0.85±0.15 | Φ17.5 | 1.5±0.15 | 0.8/1.0 |
Φ40 | ≧Φ40 | 0.85±0.15 | Φ20 | 1.5±0.15 | 0.8/1.0 |
Φ45 | ≧Φ45 | 0.95±0.15 | Φ23 | 1.6±0.15 | 0.8/1.0 |
Φ50 | ≧Φ50 | 0.95±0.15 | Φ26 | 1.6±0.15 | 0.8/1.0 |
