One: Application Environment: Rooms with anti-static flooringTemperature Control15℃-35℃Humidity Control45％-75％RH If the server room remains in a low humidity environment for an extended period, cracks may form on the floor surface.It is appropriate to increase the thickness and strength of the facing.(Recommendation: Particularly during winter, it is common to use a wrung-out damp mop to ensure the humidity of the static floor's surface.)

Maintain Requirements
    1No hard or sharp objects should be used to press, impact, or scratch the decorative surface. When entering the site, try to wear soft-soled shoes to avoid high heels or hard-soled shoes. The use of sharp tools for direct work on the floor surface is prohibited to prevent damaging the anti-static properties and aesthetic appearance of the surface.
    2Prohibition of personnel jumping directly from heights to the floor during use, and of rough handling equipment to avoid damaging the floor. Do not use a floor vacuum to move the floor, as this may cause it to deform if it comes loose during transit.
    3When moving equipment on activity flooring, it is prohibited to push the equipment directly on the surface, as this may scratch the flooring facing. The correct procedure is to lift the equipment for transport; or use a cart with rubber wheels to move the object, placing an isolation mat between the object and the floor.,Protect against floor surface damage.

4When heavy equipment is installed in the server room, it should be placed directly on the ground foundation, not directly on the floor to prevent long-term deformation due to excessive load; when placing heavier items on anti-static flooring.,The arrangement should be stable.,To prevent collapse and injury from falling debris.

5When maintaining equipment beneath the floor, use a floor lifter to lift the floor for operation, and prohibit the use of sharp tools for粗暴 disassembly; avoid damaging the floor to prevent impact on its usability and appearance.

   6While maintaining, use a vacuum cleaner or mop to keep the floor clean. Pay special attention not to spill any liquids on the floor, as it may cause the veneer to become damp and bubble. Do not use water to rinse during cleaning.,Mops and cloths should be wrung out thoroughly and cleaned regularly.
   7The floor surface can be regularly treated with anti-static wax to maintain its appearance and ensure long-term usage effectiveness.

8Prevent direct sunlight exposure,To prevent the decorative surface from premature discoloration and aging.