Warning Post Construction Plan 1. Mold Production: The warning post mold is made from round steel, divided into two halves, and equipped with bolts for securing to prevent vibration and expansion, which could affect dimensions. 2. Warning Post Prefabrication: Prefabrication is centralized. According to design requirements, a protective layer is first poured, followed by the prefabricated reinforcement. The pouring is done in layers, compacted with a vibrator, and then cured before removing the mold. The surface is then wrapped with a protective film. 3. Warning Post Foundation Excavation: Due to the mobile and fragmented nature of the warning post construction tools, the foundation is manually excavated and compacted at the bottom. 4. Spray Fluorescent Paint: Fluorescent paint is applied strictly according to the color and spacing specified in the drawings. 5. Installation: Considering the mobile, fragmented nature of the warning post construction, concrete is mixed with dry ingredients according to the ratio, adding water on-site for mixing. This prevents segregation during transportation and saves resources, avoiding unnecessary waste. Installation is done according to the design depth of the warning posts and controlled for verticality using a level, ensuring thorough compaction of the concrete pour. 6. Quality Requirements: 1. Quality is ensured in accordance with the design, construction specifications, and the client's requirements. 2. Warning posts should be vertically aligned without tilt, correctly positioned, and have bright, noticeable colors. 3. The burial depth, spacing, and height above ground are strictly constructed according to the design drawings.