I. Product Performance Advantages:
Low administrative expenses:Not classified as special equipment, no boiler operation permit or operator's qualification certificate is required.
2. High Efficiency and Energy Saving: Innovative structure, compact size, high thermal efficiency, all indicators fully meet national environmental protection requirements. Utilizes a new double-drum three-pass structure to increase the equipment's incoming water temperature, stabilize steam pressure, and achieve a high energy conversion rate with thermal efficiency over 93%. Steam is produced in 2-3 minutes, with flue gas temperature at 50-60℃.(Chimneys can be made from plastic or PVC piping)The preheater employs a serpentine fin pattern to enhance heat efficiency; Function: Changes the incoming water temperature from room temperature to 95-100℃ (or use this hot water for other purposes), reducing energy consumption of the equipment. Increased storage space for steam, better stability of steam pressure, and meets the steam demand.Dual-level gauge, dual storage steam space, for enhanced steam pressure stability and to meet steam usage demands.
3. Easy to operate:Fully Automatic Computer Liquid Crystal Touch Screen ControlAutomatic pressure regulation, automatic water replenishment, automatic heating mode switching, high level of automation, one-touch button operation mode.
4. Safety: Equipped with overpressure and water-cut protection, dual safety valves, and a pressure controller for triple safety protection, ensuring reliability and safety.
5. Eco-friendly: Non-polluting, clean and hygienic, representing the new generation of energy-saving and environmentally friendly products.
6. Wide Application: Suitable for school, hotel, and corporate cafeteria rice steaming; also ideal for warming, chemical processing, garment processing, and laundry ironing processes. If the evaporation capacity of a single unit is insufficient, multiple units can be connected in parallel to increase the required evaporation capacity. The number of steam generators to be started can be determined based on the specific steam usage. Easy maintenance, can be operated individually.
7. Key Technical Specifications
Serial Number | Item | Specs | Unit | Serial Number | Item | Specification | Unit |
1 | Rated Evaporation Rate | 300 | kg/h | 8 | Thermal Efficiency | ≥93％ | |
2 | Rated Steam Pressure | 0.7 | MPa | 9 | Design Fuel | Diesel, natural gas, etc. | |
3 | Saturated Steam Temperature | 171 | ℃ | 10 | Fuel consumption | 16.5-17.5 | kg/h |
4 | Water Temperature | 20 | ℃ | 11 | Gas consumption | 20-21 | Nm3/h |
5 | Surface Area Subject to Heat | 12.5 | ㎡ | 12 | Total Quantity | 950 | kg |
6 | Water Capacity | 29 | L | 13 | Power Supply | 220V, 1.1KW power | |
7 | Preheater | Finned Tube Coils | 14 | Dimensions: 240×85×200 cm | |||
II. Configuration List:
(1) Engine WNS0.3-0.7-YQ | |||||
(II) Auxiliary Machinery | |||||
Serial Number | Name | Model and Specifications | Quantity | Unit | Note |
1 | Burner (Gas) | BTN30G | 1 | Just | Valve assembly |
Burner (Fuel) | BTN30L | 1 | Just | Daily Use Oil Tank | |
2 | Control Box | 713Y15DQ2 Computer Control | 1 | Only | LCD Touch Screen |
3 | Pump for water supply | 750W Turbine Pump | 1 | Tai | Double-blade impeller |
4 | Controller | Water Level Control | 2 | Set | |
5 | Preheater | Finned Tube Coil | 1 | Set | |
(3) Main Body Accessories | |||||
1 | Pressure Gauge | Y100 0-1.0 | 1 | Only | Red Flag |
2 | Water-saving elbow管 | 3/8 | 1 | Root | 304 Stainless Steel |
3 | Level Gauge | DN20 | 2 | Payment | 304 Stainless Steel |
4 | Pressure Controller | LTK-D(6) | 1 | Only | 3/8 inch elbow |
5 | Drying Sensor | L=320 | 2 | Payment | Stainless Steel |
6 | Safety valve | 0.72Mpa | 2 | Only | DN25 |
7 | Main Steam Valve | DN25/DN20 | 2 | Just | One each |
8 | Inlet | DN15 | 1 | Only | |
9 | Check valve | DN15 | 3 | Just | High-temperature type |
10 | Wastewater valve | DN25 | 3 | Only | High-temperature type |
11 | Exhaust vent | DN25 | 1 | Only | |
12 | Electromagnetic Valve | DN15 | 2 | Just | 304 Stainless Steel |
13 | Pressure Relief Valve | DN15 | 1 | Set | 0.98Mpa |
14 | Blow Molding Tank | DN15 | 1 | Set | |
15 | Drain valve | DN15 | 1 | Set | |
16 | Chimney | Φ160 | 3 | Rice | Plastic |
