Operation Steps
1Pre-operation machine check:
Check for nozzle wear.
b.Please provide the Chinese content you would like translated.Inspect the spray gun, sand tube, and air tube for any damage.
2. InspectionMachineIs the cabinet filled with sand material? Pour an appropriate amount of sand into the sandblasting machine, and during the operation, add a sufficient quantity of new sand to maintain the machine. No Chinese content provided. Please provide the text to be translated.There is sufficient sand material recycling while maintaining uniformity in sand particle size.
★ Note: Ensure the sandblasting machine body is clean before using the new machine to prevent iron shavings and debris from damaging the product.
3. Openingcommenced sandblasting operations;
4.Adjust the sand quantity regulating valve and sand material thrust valve according to the processing technology to control the size of sand material flow and the intensity of the jet.
5. SpraySandUpon completion of the task, close the intake valve, open the exhaust valve to expel compressed air within the machine, and then drain the sand material inside.
Machine'sMaintain
When using a new machine or changing abrasive materials, ensure the blasting machine body is thoroughly cleaned to prevent any residual iron shavings or debris from damaging the product.；
2. Please replenish the sand material.Refer to the sand capacity specified in the technical parameters.
3. SprayMouthThe lifespan varies depending on the nozzle material.Silicon carbide material lifespan is approximately500 hours, Boron Carbide Nozzle Usage Life
Please provide the Chinese content that needs to be translated into American English.About100 hours)
4Regularly inspect the sand tubes and their joints for wear; replace promptly if severe wear is detected.
5. Regularly inspect gas storage tanks, pressure gauges, and valves.
6. The internal rubber plunger of the gas-controlled sandblasting valve should1Once a monthNo Chinese content provided, original return: "No."
