1. The spray robot showcases its back-and-forth path and repeatable accuracy.

For胶涂机器人, high repetition accuracy is required, generally reaching 0.5mm. As for paint-spraying robots, the repetition accuracy requirement is relatively lower. Currently, the paint-spraying robots from various companies can meet general requirements, such as Zhuolin's spraying robot.

2. Spray robot showcasing its mechanical arm's load-bearing capacity

According to the different spraying scenarios, configure the spray tool during the spraying process, and determine the load that the robot arm can bear. Sometimes, during the process of spraying small workpieces, the spray paint also utilizes the mechanical arm to lift small workpieces and transfer them. When considering the load on the robot arm, this factor should be taken into account.

3. The spray robot's speed and acceleration in motion

The speed or acceleration of the spray robots has been increased, with shorter flight times. In terms of rhythm, the operation time of the spray robots is prolonged to enhance their utilization rate. It should be noted that the speed of the robots is interadaptive. During the spraying process, the movement speed of the spray tool directly affects the characteristics of the tool and material, and needs to be set according to the process requirements.

4. Observe the spray robot's working trajectory range

When selecting a spray robot, it is crucial to ensure that the robot's trajectory range covers the corresponding surface or cavity of the coated workpiece. In intermittent conveyance, the spray robot sprays the workpiece, but if the relevant surface or cavity of the workpiece is not covered.