This product line is primarily suitable for composite silicate cements with a high content of inactive mixed materials, such as fly ash silicate cements, pozzolan silicate cements, masonry cements, slag cements, and offers better strength improvement when used with ordinary cement and silicate cements.

During cement production, under the condition that the comprehensive moisture content of the feed material to the mill does not exceed 2.0%, and with consistent quality and fineness control indicators for the cement, this series of grinding aid can reduce the clinker content in cement by ≥5% and increase the hourly throughput of the mill by ≥8%.

Early-strength products, used in the cement production process, can enhance the compressive strength of cement by more than 4.0MPa in 3 days under the condition that cement proportion and fineness control indicators are basically consistent, while the increase in the standard consistency water demand of cement is less than 0.5%.

Composite products for cement production can enhance the compressive strength of cement by over 3.0MPa in 3 days and 5.0MPa in 28 days, while maintaining a standard consistency water demand increase of less than 0.5%.

Our post-toughened product, designed for use in the cement production process, can enhance the compressive strength of cement by over 8.0 MPa after 28 days, while maintaining a standard consistency water requirement increase of less than 0.5%.