Lime slurry density meters are sensors installed on pipes for continuous, real-time online measurement of fluid density. They are used for process control where density serves as a core control parameter for the product, or as indicators for other quality control parameters such as solid percentage or concentration percentage.
Product Features:
Single straight pipe
Can measure slurries containing a large number of bubbles and crystals, and high viscosity conditions.
A variety of materials and flanges are available.
High-precision continuous measurement
* Included: Isolation bellows
The equipment is suitable for harsh environments and can be installed in hazardous areas.
Not sensitive to factory vibrations, pressure, and temperature.
No need to alter existing mating flanges, reducing installation costs.
In the event of internal failure in the circulating medium, control the leakage of the medium
Technical Specifications:
| Sex Available Please provide the Chinese content that needs to be translated into American English. Numbers | Accuracy | ±0.001g/cc | ±1.0 kg/m3 | ||
| Scope of Work | 0~3 g/cc | 0~3000 kg/m3 | 0 to 187.4 lb/ft³ | ||
| Repetitive | ±0.0001 g/cc | ±0.1 kg/m3 | ±0.006 lb/ft3 | ||
| Process Temperature Impact (Corrected) | ±0.0001 g/cc | ±0.1 kg/m3 | (Per °C) | ||
| Process Pressure Influence (Adjusted) | Negligible | ||||
| Process Temperature | –50℃~+150℃（–58℉~+302℉） | ||||
| Ambient Temperature | –40℃~+85 ℃（–40℉~+185℉） | ||||
| Great work pressure | Standard Type | 2MP | |||
| High-pressure type | 1450 psi (100 bar) | ||||
| Test Pressure | Tested under conditions of 1.5 times the normal working pressure | ||||
| Ingress Protection (IP) Rating | IP65 | ||||
| Material Quality Please provide the Chinese content that needs to be translated. Structural | Filling Component | Standard Type | Stainless Steel 316L | ||
| Corrosion-resistant | Alloy C22, Titanium | ||||
| Electronic component housing | Standard Type | Aluminum alloy casting | |||
| Corrosion-resistant | Stainless steel or plastic | ||||
| Pipe Polishing | Standard, Electro-polished | ||||
| Heavy Quantity | Weight | Standard Type | Typical value is 45 kg | ||
| Special Type | Dependent on the pipeline | ||||
| Special Sensuality | Power requirements | Voltage | 24VDC (four-wire system required) | ||
| 220VDC (four-wire system required) | |||||
| Output | Current Output | Power modulation on the power line, 2-wire system (4~20mA) | |||
