Colorful Tent's Assembly Method

The location decision. After considering the wind direction and terrain, a flat area was selected.

(2) Inspection of the Color Umbrella Equipment. Empty the contents of the bag and check each part individually. To facilitate the disassembly of the color umbrella and ensure nothing is left behind, it is advisable to make a record first.

(3) Lay ground pads. After the pads are in place, secure the four corners with nails. In areas with high humidity, lay a mat first, followed by placing the pads on top.

(4) Erect the支柱 and tension the main rope. Insert the ends of the ground pad beneath the支柱 at the bottom, while threading the top point of the支柱 through the holes of the two canopy posts. Pull the main ropes to the sides to prevent tilting. This forms the main shape of the canopy.

(5) Adjust the main rope, pull up the corner and waist ropes. Use the auxiliary ropes attached to the main rope to shape the canopy. Position the two pillars vertically on the ground. Next, adjust the corner and waist ropes with the auxiliary ropes to form the canopy's shape.

(6) Secure the fixed wall. Connect the canopy bottom fabric, ground mat, and lower wall sections together.

The assembly sequence for the wall-type canopy is as follows: with four people working together, it takes approximately 10 to 15 minutes to complete, assuming they are skilled. Typically, to minimize the effects of wind, rain, extreme heat, and cold, a roof cover is added as well. When inserting the支柱 into the holes at both ends of the frame, first attach the roof cover, then pull up the main rope. After securing the main rope with nails, form two sides of an equilateral triangle with the ends of the roof frame, and pull the base edge to a length equal to the支柱. From directly above the roof, the diagonal rope should align with the extension of the diagonal, while the side rope runs parallel to the diagonal rope.