Appropriate Storage Environmental Requirements for 3M Double-Sided Adhesive Tape: Temperature between 19-23°C, relative humidity between 40-60%. To achieve enhanced adhesive performance during application, follow the following actual operational procedures for 3M Double-Sided Adhesive Tape:

1. First, clean and dry the adhesive surface thoroughly. Generally, it is recommended to use a cloth dampened with a saturated solution of 1:1 IPA (grade protection) and water for surface wiping, then allow the surface to dry completely.

2. After the organic solvent is dried, apply the tape to the adhesive surface, and increase the working pressure to approximately 15PSI (1.05KG/cubic) using a drum or other method to ensure effective adhesion.

Remove the release film from the tape, then apply the required raw material, increasing the working pressure to 15PSI to ensure effective adhesion. To remove air bubbles, increase the working pressure to the point where the item can bear it.

4. The ideal temperature for sticking is between 15-38°C, do not go below 10°C.

When applying tape, start by matching one end, then gradually press down to the other end to minimize the chance of air bubbles.