There are many types of wooden crates, and their sizes and weights vary significantly. Our description of the types of wooden crate packaging is a good representation of this aspect. Therefore, there are often many questions about wooden crate packaging, and the wooden crate manufacturer provides a specific explanation:
If the center of gravity is low and the wooden box can only be loaded with one layer and the bottom area cannot be fully utilized, it should be placed at the center of the wooden box, and the bottom must be securely fastened with square wooden strips horizontally.
In the event of loading a container and encountering a small wooden box, the inter-seam loading method can be employed, where the upper wooden box is placed on the joints between the two lower boxes. The upper layer must be secured or tightly packed.
If the wooden box is small and there is significant space left at the door end, it is necessary to use wooden planks and strips to secure or tighten it.
Four, the center of gravity of wooden boxes is high, it is not sufficient to secure them only at the bottom; they must also be tightly supported with wooden strips above.
When loading particularly heavy wooden crates, it is common to encounter concentrated loads or uneven loads. Therefore, fixed equipment is necessary to prevent the goods from contacting the front and rear walls of the container.
Six, when loading a frame box into a device, it is typically secured using steel straps or, as an alternative, elastic nylon straps or cloth belts may be used in place of steel straps.