When selecting the appropriate vacuum suction cup, consider the following factors:

The weight of the object to be suctioned: This factor determines the size and number of suction cups. If the object is large in volume, consideration must be given to the balance during lifting, and the number and distribution of the suction cups should be reasonable.

2. Shape and Surface Condition of the Object Being Suctioned: This factor determines the type of suction cup, with different types of suction cups suitable for various situations. Considerations include breathability, static electricity resistance, copper ion resistance, whether the shape changes (paper, plastic), the size of the吸附surface, flatness, and shape (square, spherical, cylindrical).

3. Workplace Environment (Temperature)

Selecting suction cup materials, choose different materials based on varying temperatures. In high-temperature environments, opt for silicone suction cups or polyurethane suction cups.

4. Lifting Direction: Horizontal Lifting, Vertical Lifting

Choose Suction Cups

1. Set vacuum pressure

Ensure sufficient margin based on the specifications of the vacuum source. The safety vacuum level of the vacuum generator is approximately -40.5Kpa. As the vacuum level increases from -40Kpa to -90Kpa, the suction power increases by 1.5 times, but the energy consumption triples!

If the object is permeable or has a rough surface, vacuum levels will not increase, and alternative measures must be taken. Please contact our company for further assistance if needed.

sucker material

Select appropriate materials based on usage and environmental conditions.

Suction Cup Shape: Choose the suction cup shape and accessories based on the shape and material of the adherent object.

1. Suction Cup Mount Accessories: There are various types of accessories used for suction cup assembly. Please select according to your intended use.

(1) Fixed accessories: For general purposes.

(2) Spring-loaded Accessories: Components with springs that offer cushioning capabilities. Used to prevent damage from adhesives and to increase stroke volume. Suitable when the cushioning ability of pleated suction cups is insufficient.

(3) Anti-Rotation Accessories: These components are based on buffer mechanisms and include anti-rotation functions to maintain the position of the吸附物. Additionally, they can also control accessories with摇头 and track functions.

2. Interface Direction: The interface direction for accessories can be selected from the following types.

(1) Vertical Interface: The interface is located at the top of the accessories.

(2) Lateral Interface: The interface is located on the side of the accessories.

3. Interface connectors are selected based on the size of the interface and the diameter of the piping. Quick connectors and sleeve connectors are available for interface sizes of M3 and M5.