Have you ever seen fireproof roller shutters in everyday life? Then, the following editor will introduce how to install fireproof roller shutters? Those in need, take a look!

What are the installation steps for fire shutter doors?

First, securely fasten the door frame, create grooves at the door frame's location, and use wooden wedges for stabilization. The door frame is connected to pre-buried metal pieces.

2. Subsequently, install the door panels, followed by the speed reducer and the operational system, and place the pre-installed rock slabs into the cylinder position.

3. Install on the track, and then securely fasten both sides and the top and bottom tracks to the pre-bolted pieces in the wall.

What to Pay Attention to When Installing Fire Shutters

During the installation process, initially, you need to check if there are any pipes or ventilation ducts installed above the cave. Consider the installation standards in place; it is not allowed to have pipes above fire shutter doors. Furthermore, after installing the waterproof shutter door, immediately install the ceiling. Be cautious to maintain at least a 50mm gap between the ceiling edge and the shutter panel.

2. After installing the roller shutter door, it should be properly adjusted and tested to ensure its normal operation as a fire-resistant shutter door. Additionally, users are reminded that according to relevant regulations, fire-resistant shutters are classified as specialized fire protection equipment and can only be used for fire protection purposes. Therefore, it is not allowed to place any items or have people standing beneath the fire-resistant shutter door.

3. When using fire curtain doors, it is essential to conduct regular inspections. It is recommended to check them every three months. If any issues are found during the inspection, the power supply should be turned off immediately, followed by proper troubleshooting for the fire curtain door.