Supporting Structure Variations:

Vertical machining centers refer to those with the spindle axis perpendicular to the worktable. The vertical X and Y axes are combined, with the Z-axis moving up and down the column. They are suitable for producing small precision molds and parts. Larger vertical machining centers are about 4 meters in size and the machine type can be determined based on the specific item to be machined.

The Longmen Machining Center refers to a machining center where the spindle axis is vertically aligned with the worktable. The龙门's Z-axis support structure differs, with the Y-axis spanning between the two pillars, which increases the worktable's load capacity and processing range.

2. Varying Applications:

The Longmen Machining Center is primarily designed for large part processing. The Vertical Machining Center is mainly suitable for processing plate, disk, mold, and small shell-type complex parts.

In addition to these two distinctions, the features of the vertical machining center are more pronounced:

Eco-friendly and Pollution-Free: No oil stains or fumes are emitted during use, protecting the surrounding environment.

Fuel Supply Precision: The system can deliver oil to the main spindle and lead screws, etc., as needed by increasing the regulating valve.

3. Wide Applicability: No issues with atomization of high viscosity lubricating oil.

4. Automatic Detection and Monitoring: Capable of checking if the lubricating oil is functioning properly. In case of inadequate lubrication, it can trigger an alarm and shut down the machine to prevent abnormal operation of the equipment.

5. Particularly suitable for spindle roller bearings, offering a certain degree of air-cooling effect, which can reduce the operating temperature of the bearing, thereby extending the service life of the spindle.

6. Low fuel consumption, cost-saving.