The key function of the powered roller is to achieve the purpose of conveying goods by pushing them manually. Using a manual method to propel the conveyor belt or change the operational direction of the cylindrical component, which is a type of roller within the conveyor system, is a critical component of the conveying equipment. What are the potential malfunction issues that may arise with the powered roller in conveying equipment?
The components of the powered roller conveyor, such as the conveying belt, exhibit poor grooving ability. The support point buffer roller rotates awkwardly, so a conveyor belt with better grooving properties is being replaced. If the core of the conveying belt for transporting components is initially damaged due to impact from angular, block-like raw materials, the solution involves breaking down the small pieces or improving the dump bin to reduce raw material impact. To prevent debris from getting caught between the conveyor belt and the roller drum, ensure that small pieces of raw material and dirt are not trapped. The powered roller conveyor gets caught on hard objects at the dump bin location, so a metal detection system or magnetic elimination device is being installed.
Additionally, damage to the conveyor belts for transporting spare parts can be caused by vertical tearing, when debris from the transport of raw materials pierces the belt and gets stuck. Regularly inspect the sound card frame components for looseness, and adjust immediately if any are found loose. Looseness around the sound card frame, including falling angle steel screws, partition plates, and stuck scraper blades, requires the installation of V-shaped scrapers at the gear box. After the buffer roller is damaged and falls off, the partition plates and scraper blades may get stuck, necessitating the installation of V-shaped scrapers at the gear box. When transporting spare parts, install a suspension continuous magnetic separator device after the buffer roller is damaged. For large or medium-sized debris, install electrical equipment maintenance or ultrasonic detection equipment.
During the transportation of raw materials, the reason for the frequent breakage of the conveyor belt is due to excessive support force. Adjust the tensioning device to reduce the support force. The connector is not sturdy and the quality of the belt buckle head is poor. Replace the belt buckle head and reassemble. Replace the conveyor belt immediately if it has been in use for an extended period. Improve the maintenance quality of the belt-driven roller conveyor equipment.
