The Deep Hole Drilling Machine is a high-precision, highly automated machine tool specifically designed for deep hole processing, relying on hole processing technologies such as gun drilling, BTA drilling, and jet-assisted drilling. It achieves the processing accuracy and surface roughness that would typically require drilling, reaming, and tapping operations in a single continuous drilling process. Below, let's explore how to effectively clean and maintain the Deep Hole Drilling Machine.

Maintain the appearance of the deep hole drilling machine and its accessories to be neat and clean.

2. Knives, tools, and fixtures are neatly arranged.

3. The operation room door switches, collision protection switches, and other safety guards of the deep hole drilling machine tool must be properly installed and put into use; they must not be disassembled at will.

Before plugging in the power switch of the cabinet, check if the stabilizer's output voltage is 380V and if the three phases are balanced. If there are any abnormalities, do not connect the machine tool's power supply.

5. Prior to machining holes daily, it is necessary to run the warm-up program. If required, the machine tool's axes should be moved through the full range 3-5 times to smooth the guide rails.

6. Check the lubricant oil level at the start of each workday and ensure timely replenishment. Use ISO 68 track lubricant and observe the ground for any oil leaks at the beginning of each shift.

7. Conduct a weekly check of the hydraulic station's pressure to ensure it is normal at 2MPA. Also, inspect the oil level in the coolant oil tank and verify the adequacy of the filter paper. Be mindful of making up for any deficiencies.

8. Clean the motor cover, electrical cabinet air conditioning, and refrigeration machine protective grid of dust every two months. Regularly flush the coolant back into the oil tank to remove accumulated impurities, and pay attention to monitor the oil pressure at the outlet of the return oil pump.