Common knowledge in the field of hardware mold processing is abundant. Here, I've compiled some of the most frequent aspects, including key measures to reduce manufacturing costs, the classification of stamping processes based on the total deformation properties of materials, and the five types of deformation involved in the stamping process. Stay tuned to see what I have to say.

Major Measures to Reduce Manufacturing Costs:

Enhance the rationalization of the production process.

Enhance mold design standards, streamline production processes, and extend mold lifespan.

3. By enhancing the automation and high-speed levels in the stamping process, costs are reduced.

Design molds for simultaneous processing of various parts.

5. Cost reduction through improving material utilization methods.

According to the overall deformation characteristics of the material, the stamping process is divided into two main categories:

1. The separation process: Under the action of external forces, the stress in the deformed part exceeds the material's strength limit, causing the sheet material to fracture and separate.

In the plastic deformation process, the board material, under the action of external force, the stress in the deformed area exceeds the yield limit of the material but does not reach the ultimate strength limit, resulting in only plastic deformation and achieving a certain shape and size.

Section III: Five Types of Stamping Processes

1. Stereoscopic Compression: Redistributes volume and transfers materials to alter the shape or height/thickness of the billet.

2. Bending: Converts flat sheet material into curved components, allowing for further modification of the shape. Includes bending, rolled edges, and twist deformations.

3. Rolling: To shape flat billets into hollow sections of required shapes, or to further alter the dimensions of hollow sections.

4. Shaping: Modify the shape of the workpiece or billet through various types of local deformation. Shaping deformation includes undulating shaping, flanging, necking, bulging, rolling, and整形.

5. Cutting, Punching: This involves separating parts of the material from another part, either not sealed or unsealed. Methods under this category include blanking, punching holes, trimming edges, cutting off, sectioning, and切口.

Here is some common knowledge about metal stamping processing. Through this introduction, we hope you have a better understanding of metal stamping processing.