A hydraulic shearing machine is a cutting machinery used for quickly shaping and cutting various metal sheets. It utilizes the upward-moving upper blade and the fixed lower blade, applying shearing force to metal sheets of different thicknesses through a reasonable blade gap, causing the sheets to fracture and separate into the desired dimensions.

Hydraulic shears are categorized into two types: hydraulic swing shear and hydraulic guillotine shear.

The shearing machine for stainless steel water tank panels, as required, commonly processes stainless steel tank sizes of 1000×1000, 1000×500, and 500×500mm into shapes. The hydraulic shearing machine is primarily used for blanking water tank panels: stainless steel steel plates are sheared into the required sizes for stamping by the hydraulic shearing machine. The selected models for the shearing machine are QC12Y-6x2500, QC12Y-8x2500, and QC12Y-6x3200, which are applied for cutting and shaping stainless steel water tank panels.

The hydraulic cutting machine for stainless steel tank panels features an integrated logic circuit hydraulic system, controlled by sequence valves, with accumulator return for smooth operation, low noise, and simple maintenance. A three-point roller support structure is used for hydraulic braking. The hydraulic system controls the up and down movement of the blade plate. The cutting stroke is controlled and adjusted by the system to set the cutting length, allowing the blade to not complete the entire cycle, saving working time, increasing the number of strokes, and thus improving production efficiency.