Electrolytic Ultrasonic Cleaning Machine Introduction:

Electrolytic cleaning is a method of cleaning that uses electrolysis to remove dirt from the surface of metals; electrolysis is a process where substances undergo chemical decomposition under the influence of electricity. During the electrolysis process, the dirt on the metal surface begins to flake off, and the stripping is accelerated under the impact of ultrasonic waves. Metals with greases, mineral oils, rust, rust spots, carbon deposits, and oxide layers on the surface are referred to as electrocleaning for degreasing.

When an electric current passes through a water solution containing a special electrolyte, oxygen is produced near the positive electrode of the electrolytic cell, while hydrogen (H₂) is produced at the negative electrode. Place the metal parts to be cleaned in the positive electrode of the electrolytic cell. During the electrolysis process, tiny H₂ bubbles are generated on the metal surface, which help to dislodge dirt from the metal.

2. Ultrasonic cleaning utilizes a 40KHZ high-frequency power source to convert electrical energy into mechanical energy in the transducer. During this process, the transducer transfers tremendous energy to the cleaning槽 solution, creating areas of positive and negative pressure in the liquid. This generates thousands of cavitation bubbles, which continuously form and冲击 the surface of the metal being cleaned, rapidly removing dirt from the metal surface.

3. The recirculation system is composed of a corrosion-resistant American Little Giant magnetic pump and filters to form an automatic recirculation, quickly isolating the dirt shed during cleaning with the filter cores, reducing the floating matter on the liquid surface. At the same time, it can accelerate the electrolysis of the solution. Purify the solution and improve the utilization rate of the solution.

Electrolytic ultrasonic cleaning machine cleaning process description:

The electrolytic ultrasonic system consists of an ultrasonic generator system, an electrolytic circuit system, a recirculating filtration system, a control system, mold cleaning liquid, and water-based rust inhibitor.

1. The electrolytic cleaning system emits gas onto the metal surface, using the effect of a sauna to remove dirt, impurities, and completely eliminate soot, rust, resin components, moisture, and oil stains from molds. The dirt is stripped away by the vibration of ultrasonic waves and floats up, with the metal adhering to the cathode, ensuring even the smallest corner's dirt is completely removed.

2. Restore the metal to its original copper green, reviving its original splendor.

3. Even complex shapes can be cleaned of dirt.

4. Ensures complete and effective stain removal.

5. Excellent rust and corrosion prevention.

6. Saves one hour compared to manual cleaning.

7. More environmentally friendly and safer than using organic solvents.

8. Significantly reduced the failure rate after cleaning.

Washing Process:

Process: Gold mold cleaning for 10 minutes --- spray cleaning for 2 minutes --- 3 minutes of rust prevention.

Use: Cleaning for plastic molds, cores, modules, inserts, and inserts.

Model Specifications:

Before and After Product Comparison