The brick factory adheres to the principles of cost reduction and profit enhancement. The cost of producing bricks consists of materials, labor, land, utilities, and so on, which are largely fixed and often overlooked. There is a plastic steel strapping used for packaging bricks. If the strapping is not chosen properly, it not only increases waste and costs but also leads to brick spillage during transportation, resulting in losses. So, how should a brick factory select its PET plastic steel strapping?

Tear resistance

Cut each 2-meter-long plastic steel strapping, fold and clamp it onto the sample tape with clamps, ensuring each clamp is spaced 20 cm apart. Observe for any tension or brittleness in the strapping, as well as any brittle clamps on the sample tape, which are clear indicators of poor quality. Creat Packaging's strapping utilizes a new material with enhanced tear resistance, meeting the high demands of brick factories.

2. Belt bending degree

Randomly select 5 steel wire tie straps, each approximately 5 meters in length, with both ends secured. Lay them flat on a level surface. Inspect for any visible or tight bends.

3. Tensile Strength Break

Common PET塑钢 binding specifications used in brick factories typically include 1208, 1509, 1608, 1610, and 1910 sizes. The tensile strength of the binding tape determines its quality. The higher the tensile strength, the greater the exposure, indicating better performance and quality.

Winding and Outer Packaging

The better the quality of the plastic steel strapping, the more manufacturers will continuously improve the customer experience. The winding of the straps and the outer packaging are the details. The outer packaging is loose, using thin film or paper packaging.

Brick factory utilizes packaging tape

Due to the sharp edges and uneven appearance of the bricks, their bundling and packaging requires high standards for plastic steel straps. Choosing PET plastic steel straps can help reduce costs and further enhance efficiency.