A treatment agent for applying double-sided adhesive to high-temperature silicone rubber products (due to the non-polar nature of silicone rubber, standard adhesives often fail to achieve ideal results).

Surface treatment for silicone rubber materials, effectively improving the surface polarity of silicone rubber, significantly enhancing adhesive properties. Also, painting and screen printing on the silicone rubber after treatment yield good results.

Widely used on silicone foot pads, silicone accessories, and double-sided silicone adhesive backing for silicone, with trademarks and labels affixed to the silicone.

It is a solvent-based polymer, single-component, easy to use.

Detailed Performance:

1. Appearance: Colorless and transparent, low viscosity organic solution.

2. Stability: Store at room temperature for one year. Neutral, non-corrosive to packaging iron drums.

Viscosity: 2-5 (cps) Active Substance: ≥50% Color: Transparent

Instructions for Use:

1. Clean the oil, water, impurities, etc., from the adhesive surfaces of the silicone rubber products.

2. Apply JD-206 silicone adhesive treatment to the surface of the silicone (silica) product that requires bonding. Typically, apply one to two coats, then let it dry for 2-10 minutes at room temperature.

3. Apply double-sided adhesive or pressure-sensitive tape to the JD-206 silicone-coated products, then firmly press the adhesive surfaces together.

4. Bonds together after about 2 hours, achieving ideal strength in 24 hours.