Product Features:
Two-component high-temperature resistant epoxy strong AB adhesive, formulated with imported raw materials and advanced technology.
2. Non-volatile, low-odor, environmentally friendly, and excellent insulation properties.
3. The solidified material is fire-resistant, oil-resistant, water-resistant, acid and alkali-resistant, wear-resistant, and has good corrosion resistance.
4. Room temperature curing, with long-term resistance to low temperatures down to -60°C and high temperatures up to 180°C to 250°C, and instant resistance to temperatures above 280°C.
Product Application:
Adhesives, potting, and repair services for machinery and electrical equipment, power plants, mines, steel, transformers, electrical appliances, chemical pipelines, ceramics, electric motors, battery encapsulation, and mold manufacturing.
2. Not applicable to elastic or soft goods
Performance Parameters:
| Model | Colloidal color | Viscosity (CPS) （25℃） | Adjusting glue ratio Example | Operable upon request Room (25°C) | Curing Time （25℃） | Shear strength Psi (Pounds per Square Inch) | Thermal resistance （℃） | Shelf Life (at 25°C) |
| JD-828 | Transparent | 9000-10000 | 1:1 | 30 minutes | Cure in initial set in 2 hours, fully cured in 24 hours. | ≥460 | -60 to +280 | 12 months |
| Transparent | 9000-11000 | |||||||
| Model | Tensile strength | Breakdown Voltage | Volume Resistance | Sod's Hardness Degree | Flame retardant | |||
| JD-828 | 22mpa | ≥22KV/mm | ≥1.010(15th) Ω | ≥80 | FVO grade | |||
Note: Due to variations in material, surface cleanliness, temperature differences, etc., the strength and curing speed may vary slightly; the data provided is for reference only.
Instructions for Use:
●When using, treat and clean the surface of the material to be bonded according to different materials.
After mixing A and B components in the proper ratio and ensuring they are well blended, apply a thin layer onto the substrate and gently press to adhere.
If the temperature is too low, heat the adhesive material.
●Initial gel curing in 1 hour, optimal effect achievable in 24 hours. Please conduct performance tests on the product after 48 hours of glue application to ensure the stability of the adhesive properties.
**[Important Notes]**
Keep workplace ventilated and out of reach of children.
● When operating, please wear protective gloves. In case of contact with skin or eyes, rinse immediately with clean water or seek medical attention.
Do not mix two types of adhesives when not in use, and do not cover the adhesive cap incorrectly after use.
Store in a cool, dry, well-ventilated area and away from heat.
When using in bulk by users, please conduct a trial first. Avoid affecting the bonding effect due to improper operation.
【Packaging & Specifications】
● 60ml/set, 2kg/group, 24kg/box, 20kg/drum
