Product Features
One-component, neutral room temperature curing, non-toxic and non-corrosive.
Vibration-resistant, corona-resistant, and leak-proof insulation; excellent resistance to aging and ultraviolet radiation, as well as moisture and water resistance.
Withstanding extreme temperatures, it can be used within a range of -50℃ to 250℃.
Fast curing speed, with excellent adhesion to glass, metal, most plastics like ABS.
Application Range
Adhesive bonding of electronic components, sealing for electrical appliances.
Inspection Parameters
| Serial Number | Inspection Items | Technical Specifications | Test Results/Actual Measurement |
| 1 | Appearance | Black or white, paste-like, free of impurities, smooth and fine surface | Meets requirements |
| 2 | Drying Time | Drying time: 8-15 minutes | 10 minutes |
| 3 | Hardness | HsA35±5, processed in accordance with GB/T531-1999 requirements, with a sample thickness of not less than 6mm, test at six different locations, take the middle value | Average is 38HsA |
| 4 | Tensile Strength | Not less than 1.5 Mpa, tested according to GB/T 1040-92 testing method | 2.07Mpa |
| 5 | Tensile elongation at break | Not less than 200%, tested according to GB/T 1040-92 testing method | 320％ |
| 6 | Aging Test | Extrude the sealant, let it fully cure, and then place it in an oven at 150°C for 15 minutes. Accelerated weathering test, with the requirement that the sealant must not exhibit powdering or cracking upon completion of the test. | Meets requirements |
| 7 | Heat resistance | Extrude the sealant, let it fully cure, then place it in an oven at 180℃ for 48 hours. Baking, the sealant must not exhibit cracking, deformation, or powdering. | Meets requirements |
| 8 | Water resistance | The fully cured sealant must be placed in hot water at 50℃ for 7 days to ensure sealing. No cracking, powdering, or softening of the glue shall occur. | Meets specifications |
Usage Instructions and Precautions
The curing speed and surface dry time of sealant vary with temperature and humidity. Within a certain range, the higher the temperature and humidity, the faster the curing speed.
This product solidifies from the surface inward by absorbing moisture from the air, achieving a depth solidification of 2-4 mm within 24 hours at 25°C and 55% relative humidity. If the adhesive layer is thicker or in areas that are less exposed to air, the curing time will be extended.
Storage and Shelf Life
Store in a cool, dry place at 25°C; shelf life is 8 months.
Packaging Specifications
100ml per bottle; 100 bottles per carton.
300ml per tube, 25 tubes per carton
2600ml per bottle, 6 bottles per case.
Other
This product is non-hazardous; however, do not ingest or get in eyes. Mild skin contact does not affect health.
This product releases aliphatic substances during the curing process; ventilation should be ensured in the workplace.
Transportation: No regulations in domestic (CN-GB), international (IMO, IATA, UN); classified as non-hazardous goods.
Detailed safety information for the product is available in the Material Safety Data Sheet (MSDS) for that product.
