Product Features
One-component, neutral room temperature curing, non-toxic and non-corrosive.
Vibration-resistant, corona-resistant, and leakage-proof insulation; excellent resistance to aging and ultraviolet radiation, as well as moisture and water resistance.
Withstanding extreme temperatures, it can be used within the range of -50℃ to 250℃.
Fast curing speed, excellent adhesion to glass, metal, PP, rubber, ABS and most plastics.
Typical Applications:
A variety of structural adhesive and sealing in the process of manufacturing: such as, automotive interior adhesive and sealing, refrigeration equipment adhesive and sealing, ship adhesive and sealing, chemical container adhesive and sealing, wire and cable adhesive and sealing, refrigerator adhesive and sealing, electronic appliance adhesive and sealing, underwater lighting and street lamp adhesive and sealing, solar adhesive and sealing, power supply adhesive and sealing, sensor adhesive and sealing, advertising lighting adhesive and sealing, and engineering adhesive and sealing, etc.
Moisture and water-resistant encapsulation for delicate electronic accessories; potting for various instruments, electronic components, modules, etc.
Especially suitable for bonding silicone to silicone, silicone to metal, plastic, glass, wood, ceramics, cement, and other materials.
Widely used for bonding and sealing in stainless steel products, food machinery, steel structure workshops, refrigerated trucks, etc.
Inspection Parameters
| Serial Number | Inspection Items | Technical Requirements | Test Results/Actual Measurement |
| 1 | Appearance | Black or white, paste-like, free of impurities, finely smooth surface | Meets requirements |
| 2 | Drying Time | Drying time: 8-15 minutes | 10 minutes |
| 3 | Hardness | HsA35±5, processed in accordance with GB/T531-1999 requirements, sample thickness not less than 6mm, test at six different locations, take the middle value | The average is 38HsA |
| 4 | Tensile strength | Not less than 1.5 Mpa, tested according to GB/T 1040-92 testing method. | 2.07Mpa |
| 5 | Tensile elongation at break | Not less than 200%, tested according to the GB/T 1040-92 testing method | 320％ |
| 6 | Aging Test | extrude the sealant, allow it to fully cure, then place it in an oven at 180°C for 15 minutes. Weathering test, requires that after the test, the sealant must not exhibit any powdering or cracking. Elephant | Meets requirements |
| 7 | Thermal resistance | Discharge the sealant, allow it to fully cure, then place it in an oven at 200°C for 48 hours. Baking, the sealant must not exhibit cracking, deformation, or powdering. | Meets requirements |
| 8 | Water-resistant | The fully cured sealant is to be soaked in hot water at 50℃ for 7 days, ensuring airtightness. No cracking, powdering, or softening of the glue shall occur. | Meets requirements |
| 9 | Volume resistivity (Ω.cm) ≥ | 1.0×1015 | Meets requirements |
| 10 | Breakdown Voltage （KV/mm）≥ | 23.5 | Meets specifications |
| 11 | Temperature Range | -60～220℃ | Meets requirements |
Instructions and Precautions
The curing speed and surface dry time of sealant vary with temperature and humidity; within a certain range, the higher the temperature and humidity, the faster the curing speed.
This product solidifies from the surface inward by absorbing moisture from the air, achieving a depth solidification of 2-4 mm within 24 hours at 25°C and 55% relative humidity. If the adhesive layer is thicker or in areas less exposed to air, the curing time will be extended.
Storage and Shelf Life
Store in a cool, dry place at 25°C; shelf life is 8 months.
Packaging Specifications
100ml per bottle; 100 bottles per case
300ml per bottle, 25 bottles per carton.
Others
This product is non-hazardous; however, do not ingest or get in eyes. Mild skin contact does not affect health.
This product releases aliphatic substances during the curing process; ventilation in the workplace is essential.
Transport: No regulations in place for domestic (CN-GB), international (IMO, IATA, UN); classified as non-hazardous goods.
For detailed safety information about the product, please refer to the Material Safety Data Sheet (MSDS) provided for the product.
