Product Features:
For difficult-to-adhere plastics and porous materials, 9 Points Adhesives has independently researched and developed a specialized instant adhesive.
Two: Single-component, easy to apply. Highly suitable for continuous production line operations.
Three: Offers superior performance with high efficiency, low odor, low whitening, and moisture resistance.
Application Scope:
Its low odor and low whitening properties are highly suitable for bonding high-grade precision metals and electronic wires in electronics and electrical appliances, as well as adhesives for plastic elastomers.
Performance Specifications
| Model No. | JD-430 |
| Product Features | Low odor, low bleaching, medium viscosity, good moisture resistance |
| Application Scope | Electronics and appliances, precision metals, wires, rubber, porous materials, metal-to-plastic bonding, adhesive for cosmetics |
| Color | Colorless transparent liquid |
| Viscosity (mpa.s) | 2500－2600 |
| Temperature Range (°C) | －50～＋110 |
| Tensile Strength (kgf/cm²) | 120 |
| Shear Strength (Mpa) | 10 |
| Curing Rate (s) | 25－35 |
| Appearance/Packaging | 20g/pack, 500g/pack, 1000g/pack |
温馨提示: The above performance data is a typical set obtained under laboratory conditions of 25°C temperature and 70% humidity and is for customer reference only. It does not guarantee all data achievable in a specific environment. Please use test data as the standard when operating.
【Usage Instructions】
● Remove dust, oil, rust, etc. from the bonding surface using a dry cloth or sandpaper, then wipe with a cleaning agent to clean the bonding surface.
Unscrew the front cover for immediate use. If there's glue at the bottleneck, first clean it with a soft cloth, then place a PE dropper over it to control the glue flow and ensure effective use.
● Apply a small drop of the bonding agent on the next surface, immediately proceed with the bonding, and maintain until it hardens. The curing time ranges from a few seconds to several minutes. Achieve practical strength in approximately 30 minutes, and obtain higher strength after 24 hours.
After use, clean the bottle mouth and screw the cap tightly.
After use, please store the glue in a cool and dry place.
**[Important Notes]**
Do not wear knitted gloves while using; the JD series quick-dry adhesive is absorbed by the knitted material of the gloves, causing a rapid polymerization reaction that generates high heat, which can burn your hands. Therefore, please remember not to wear knitted gloves when using it.
JD series quick-drying adhesives have a volatile irritant. When used in large quantities, ensure the workplace is well-ventilated.
When dealing with large leaks, the area can be solidified with water before scraping off.
