Product Features
This product is manufactured from polyester containing a hydrocarbon-terminated end group and organic isocyanate, with a single-component packaging that cures using moisture from the air.
Easy to use, single-component, high strength, high performance, can cure at room temperature or with heat, etc.
Features include waterproof, heat-resistant, cold-resistant, oil-resistant, corrosion-resistant, and non-whitening properties.
Nylon adhesive is suitable for bonding nylon materials such as PA6, PA66, PA1010, PA1013, etc.
Application Range
Widely used for bonding and repairing in crafts, toys, nylon pipes, nylon wire, nylon connectors, and nylon display cabinets.
Performance Specifications
Appearance: Light yellow to brownish red, thick, sticky liquid
Non-volatile matter: 85±1%
Viscosity: 6000-10,000 cps
Shear Resistance: Nylon-Nylon ≥ 50 kg/cm²
【Usage Instructions】
Clean oil stains from the surface of the adhesive material.
Single or double-sided adhesive coating, immediate bonding required (no drying before bonding), ensuring tight contact.
Considerable intensity within 24 hours, reaches operational intensity after 5 days.
To accelerate curing speed, increase the workshop air humidity to 95%. You can also add a curing agent. Alternatively, place the plastic parts in an oven at 70 degrees for curing.
【Important Notes】
For flammable goods, store in a cool, well-ventilated area and transport according to flammable goods regulations.
Use with good ventilation and prevent contact with open flame. Always close the adhesive after use to prevent solvent evaporation.
This adhesive has certain corrosive and toxic properties. Do not ingest or get it in the eyes. Avoid contact with skin; if it does get on you, wash it off with alcohol.
【Packaging Specification】10kg/bottle.
[Storage] This product should be stored in a cool, dry, well-ventilated area, sealed.
Shelf Life: 6 months; after expiration, if tested and approved, it can be continued to be used.