Do you know how to use AB resin glue? Let me tell you. Steps for using AB resin glue:

1. Clean the item to be bonded at room temperature, then mix A adhesive and B adhesive by eye at a 1:1 ratio.

Apply within 2-3 minutes to the surface to be bonded, and secure for 5-10 minutes to achieve positioning. The adhesive reaches 50% of its high strength after 30 minutes of bonding, and achieves full high strength after 24 hours. It can be used in environments ranging from -60℃ to 100℃.

3. Stir the mixed AB agent left and right, in and out, using a clean round stick, tilting the container at approximately 45° until thoroughly mixed (if the amount is large, use an electric mixer to ensure even mixing).

4. Simply pour the pre-mixed AB adhesive into the nipple bottle container and it's ready for use.

5. For areas slightly larger or quantities a bit more, vacuum-packing is required if possible (or a torch with gas can be used to burn off the surface of the workpiece repeatedly for a quick and large-area defoaming effect).

6. Once the bubbles have completely dissipated, the product can be transferred to the oven, where it will be heated from low to high temperatures until fully hardened before being removed from the oven.

Nine Point Adhesives is a professional technical and environmentally friendly producer engaged in the research, production, and sales of adhesives. For more information, please contact us.