Real-time calculation of the diameter of aluminum coils on the uncoiler. The "window" metal strip cutting machine that provides dynamic tension adjustment, due to the high machine line speed, and the working principles of each component are as follows. Not involved in the work: 1. Uncoiler: Used to open the incoming aluminum coil for the metal strip cutting machine. It can also lower the top roller. Disc shear: The main process equipment of the unit. 8 Speed measuring roller: The measuring point for the winding line speed, ensuring the left and right ends of the finished roll meet quality requirements. Metal strip cutting machine to prevent the disc shear from slipping. When the machine line is working, the top roller can be lifted to provide various opening tensions under different roll diameters. Used to complete the longitudinal shearing of the strip material, making the left and right ends of the finished roll meet quality requirements. The main application scope and main components of the electrical control system of the longitudinal shearing metal strip cutting unit.

To meet process and operation requirements and maintain a stable winding line speed, equipment such as metal strip slitting machines with static and dynamic compensation is required. The 1.4 disk shear is a key process equipment in the machine line, with its stable control being crucial to the entire system. The main components of the longitudinal shearing electrical control system include: uncoiler, speed roller, feed roller, trim shear, disk shear,活套坑 (live-bottom pit), tension pad, tension roller (machine), tail shear, and winding machine. The electrical control system of the longitudinal shearing strip unit is mainly applied to the strip and sheet materials in the black metallurgy industry, such as stainless steel and aluminum foil, and to similar materials in the non-ferrous metallurgy industry, such as copper plates and strips. Improper handling of waste edge winding can directly affect production if it leads to a broken strip. This system can achieve tension gradient control and add various tension compensation, which are the primary functions and control requirements of metal strip slitting. It also serves as one of the bases for calculating the winding diameter of the winding machine. A constant line speed control is required, and it is used to control the constant tension metal strip slitting machine at the uncoiling section to assist the disk shear in providing forward tension at the uncoiling section. The feed roller: assists the uncoiler in threading the aluminum plate towards the winding machine during threading. The 5 live-bottom pit: used to release the transverse internal stresses in the incoming aluminum coil, which affects the strip after longitudinal shearing in the metal strip slitting machine.

Tension Pad Co. partners with Tensioning Strip to provide the metal strip tensioning machine for the winding section. The importance of the winder is self-evident: it is where the finished products after longitudinal cutting are re-wound. It is used to complete the longitudinal cutting of strip materials and is one of the main equipment that affects whether the finished rolls can be "wound evenly." Head Trim: Used for handling the leading edge of the material and for cutting away excess or substandard parts from both sides of the incoming aluminum sheet. Tension Pad: The primary equipment for providing tension in the winding section.