Steel structure factory buildings primarily refer to those where the main load-bearing components are made of steel. This includes steel columns, beams, steel foundation, steel roof trusses (of course, with larger spans, steel trusses are predominantly used nowadays), steel roof coverings, and note that the walls of steel structures can also be supported by brick walls. With the increase in steel production in our country, many have started to adopt steel structure factory buildings, which can be further divided into light and heavy-duty steel structures. Industrial and civil buildings constructed with steel are known as steel structures. What are the acceptance standards for steel structure factory buildings? Let's find out below.

Structural steel factory buildings and foundations must be securely connected, with no missing fasteners.

2. Steel structure factory buildings must not exceed a vertical deviation of 10mm.

Boards must not have any noticeable gaps between them.

4. Steel structure factory buildings must be sealed with sealant at the joints of aluminum channels and windows.

5. After the installation of gutters and roof edges is completed, it is essential to inspect that the sealant is intact.

When fixing boards and aluminum materials, the mandrel rivets must be aligned in a straight line, with a spacing no greater than 400mm.

7. Aluminum window installations must be secure and fully equipped with accessories.

8. The roof is fitted with profiled tiles, the joints must not be less than one wave, and the sealing must be good with no leaks. The ridge tile joints must be smooth and flat.

9. Drain pipes should be securely installed and maintained in a vertical position.

10. After the project is completed, all dust and debris are cleaned up, ensuring windows are sparkling, floors are spotless, and lights are bright. The exterior steel structure factory is clean and tidy.

11. Exposed iron components must be coated with anti-rust paint, exposed foundations should be plastered with cement powder, and aluminum alloy roots must be securely fastened to prevent exposure.

The eleven key points above outline the standards to be met during the installation and acceptance inspection of steel structure factory buildings. We hope they are helpful to all.