Regular inspections of power sources and wiring

The power supply and wiring of air-source heat pumps should be checked regularly to ensure they are in good working condition. The power supply and wiring should remain dry, and the wires should not be damaged or aged. If any issues with the power supply or wiring are found, they should be replaced or repaired immediately.

Maintain cleanliness

Air-source heat pumps should be kept clean, especially the condenser and evaporator. These components should be cleaned regularly to prevent the accumulation of dust and dirt. This can improve the efficiency of the heat pump and prevent poor heat dissipation.

3. Check Refrigerant

Refrigerants are crucial for the normal operation of air-source heat pumps. Therefore, the level of refrigerant should be checked regularly and maintained at an appropriate level. If the refrigerant level is too low, refrigerant should be added. Please note that only professionals should add refrigerant to ensure safety.

4. Maintain Pumps

If the air-source heat pump is equipped with a pump, it should be regularly maintained. This ensures smooth water flow and prevents clogs. The pump should be kept clean, and seals should be replaced or repaired.

5. Inspect the control panel

The control panel is a crucial component of an air-source heat pump, controlling all its functions. Therefore, the control panel should be checked regularly to ensure it operates normally. If the control panel malfunctions, it should be repaired or replaced immediately.