The key to a cleanroom is the purification equipment, which ensures a dust-free, sterile, and properly temperature and humidity-controlled environment. Purification equipment transports high-purity air to different rooms via ducts, and the quality of the ducts greatly impacts the cleanliness of the room. The manufacturing process of the ducts is crucial, and many issues need to be addressed during production. Below, Dongguan Huake Electromechanical introduces the precautions for duct manufacturing in Dongguan's cleanrooms.
With the rapid development of design, the manufacturing process of ductwork is also evolving. Some large cities are using automated production lines to manufacture ductwork to increase production speed and improve the quality and processing efficiency of the ductwork. In fact, automated production lines are suitable for environments with lower cleanliness requirements. For Dongguan's clean room, on-site manufacturing is preferred to ensure better sealing of the ductwork, leading to more energy-efficient operation of the clean room.
1. Ductwork Processing Environment: The processing environment for ductwork is highly regulated. For newly constructed dust-free workshops in Dongguan, if the cleanliness level is not up to standard, a dust-free environment can be created in the non-clean area by tightly closing doors and windows, and constructing the ductwork. It is crucial not to set up outdoors. If ductwork needs to be made outdoors, steel plates should be laid on the ground to prevent scratches caused by dust and sand particles, ensuring the ductwork's seal integrity.
2. Duct Material: Dust-free workshops in Dongguan often use high-quality galvanized steel plates as the material for ducts. For ducts outside dust-free workshops, stainless steel plates or aluminum plates can be used. It is recommended to use flange connections for ducts. It is not advisable to use plug-type connections or lapped-type joints, as these may result in air leakage and poor sealing.
3. Engineering Volume: For the installation of ductwork in Dongguan's cleanroom, if the scale is large, it can be quite time-consuming. Automation in the production process can be adopted. If the ductwork installation involves a smaller volume of work, it is recommended to have a semi-mechanical and semi-manual production of ductwork on the construction site.
This concludes the precautions for the manufacturing of ductwork in Dongguan dust-free workshops introduced by Dongguan Huakai Electromechanical. We hope this article has been helpful to you. Should you have any questions, feel free to consult us promptly.
