Product Introduction / INTRODUCE
The槽混合 machine is made of stainless steel at all points of contact with materials, with a small gap between the paddle and drum body, ensuring thorough mixing without dead spots. The stirrer shaft ends are equipped with sealing devices to minimize material leakage. The hopper features push-button control for easy discharge, making it suitable for materials requiring high uniformity and significant differences in material density.
Product Parameters / Parameter
Operating Principle / PRINCIPLE
Prior to operation, an empty run trial start-up should be conducted. Before the trial start-up, check the tightness of all machine fasteners, the oil level of the reducer, and the integrity of the motor equipment. Then, turn off the main power switch and perform an empty run trial. Press the reverse feeding and reset buttons separately to check if the operation is smooth. Proceed with processing after ensuring it meets the above requirements (do not use the reverse feeding and reset buttons simultaneously).
● After adding the material, cover the hopper lid to prevent material from spilling out. The lid is made of acrylic for observing the mixing process. Once the mixing is effective, press the dump material button to start dumping. Stop when the hopper is near the base to avoid damaging parts. After dumping, press the reset button to return the hopper to its original position.
Product Features / CHARACTERISTICS
● Good dispersion: The equipment solves issues such as unevenness and dead corners caused by different specific gravities of materials. This equipment features a five-axis mixing structure with a flying knife mortar, capable of dispersing various short fibers.
Wide Application Range: This equipment meets the production needs of various dry powder mortars with different performance requirements, such as bricklaying mortar, plaster mortar, thermal insulation system polymer mortar, polystyrene particle mortar, and other types of dry powder mortars.
Low investment: This equipment offers significant price advantages with a small investment and rapid effectiveness.
● Simple and Convenient to Use: The equipment boasts a small footprint, easy operation, low energy consumption, and can produce 5-8 tons per hour.
● Long lifespan: The equipment features all high-strength wear-resistant steel components in its vulnerable parts, ensuring a long service life.
Product Application / USE
The CH series slot-type mixer can meet the production needs of dry powder mortar with various performance requirements and is widely used in industries such as chemicals and food.
