100kw Perkins diesel generator
(1)After the engine starts, check the control box module for various parameters: oil pressure, water temperature, voltage, frequency, etc.
(2)Generally, once the engine is started, the speed reaches directly.1500r/minEngines with idle speed requirements typically have a consistent idle duration.3-5 Do not idle for extended periods, as this may damage the generator's related components.
(3)Inspect for any leaks in the oil, water, and gas lines of the equipment, checking for signs of oil, water, or gas leakage.
(4)Ensure all connections and fastenings on the aircraft are secure, check for any looseness or excessive vibration.
(5)Inspect the various protective and monitoring devices of the aircraft crew to ensure they are functioning properly.
(6)Once the speed reaches the rated speed and all parameters stabilize during no-load operation, close the circuit to supply power to the load.
(7)Inspect and confirm that all parameters on the control panel are within the allowable range; recheck the vibration of the unit, check for any signs of three leaks, and look for any other malfunctions.
(8)Operators must be on duty during operation and overloading is strictly prohibited.
Small and QuietTO120000ETDetailed specifications
I. Technical Specifications
Rated OutputKW 100 110
High-powerKW 110 120
Rated FrequencyHz 50 60
Rated VoltageV 380/220
Rated Speedrpm 1500 1800
Please provide the Chinese content that needs to be translated into American English. Number: Single Phase - Three Phase
Launch Method: Electric Start
Power Factor: 0.8/0.9
Adjustment Method: AVRAutomatic Voltage Regulator
Noise Level LP7m:65-75db
Frequency Adjustment: (%):≤±0.5(Steady State)
Voltage Fluctuations: (%):≤±0.5
Steady-state speed regulation%≤±1%
Engine Technical Specifications:
Power Model: YOTOTI120000
Please provide the Chinese content to be translated. Please provide the Chinese content you would like to be translated into American English.： BrandOur drive
Vessel Rim: 6*130*142MM
Please provide the Chinese content to be translated. Quantity: 6.4L
Cylinder arrangement: Inline
Cylinder Quantity: 6Vessel
Cooling Method: Closed-loop water recirculating cooling
Fuel Supply Method: Direct喷射
Speed Control Method: Electrical Speed Control
Inlet method: Natural Aspiration
Engine Oil Model: 15W/40CD
Fuel Model: 0#Light Diesel Fuel
Diesel Fuel Tank 200L
Engine Oil Consumption:206g/kw•h
Lubricant Oil Tank17L
Motor technical specifications:
Motor Model: TO120000ET
Rated Power: 100KW
Rated CurrentA 454.5/263
Contact Method: Three-phase, four-wireYForm-fitting method
Protection Grade: IP22
Insulation Grade: HLevel
Other Configurations:
Airframe dimensionsL×B×H）：2800*1100*1590
Aircraft Weightkg）：1400
The low oil pressure alarm system can automatically shut down the engine.
Electric start ensures quick engine startup.
The new automatic voltage regulator ensures stable output voltage.
TwoStandard of Execution:
International Standard CertificationISO9001：2000
Industry Execution StandardsGB/T2820.5-09
No Chinese content provided, so the translation remains unchanged: "Three."Configuration
Standard Configuration
Industrial Water-Cooled Diesel Engine
Single-bearing drip-proof generatorIP22 Protection, Insulation Class H
50℃ Environmental Temperature Radiator, Double-layer Cooling
Electric Start
Standard Air Filter
Out-of-Service Switch
Steel base with vibration-dampening pads
Silencer device
Battery Storage
Warranty Period:
(Domestic) Post-Commissioning Aircrew Training Approval Achieved12 months or 1,000 cumulative operating hours, whichever comes first.
Due to product quality issues, we offer free repairs or replacements, with lifetime paid service! (Warranty does not cover consumables, commonly used parts, damage caused by human error, or neglect in maintenance.)
In case of factory adjustments, the original factory's warranty terms will apply!
Silent Diesel Generator Noise Reduction Measures
1Vibration reduction facilities are equipped with high-performance shock absorbers between the diesel engines, generators, and bridge structures to minimize the noise generated by vibrations.
2Soundproofing enclosures, featuring enclosures made with four to five layers of sound-absorbing materials, effectively absorb and isolate noise.
3The labyrinthine air intake silencer with three layers of sound-absorbing material ensures an adequate supply of fresh air while effectively sealing out noise.
4The ventilation silencers, featuring a labyrinthine design with three layers of sound-absorbing material, ensure both smooth air flow and effective noise containment.
5The adoption of exhaust mufflers and impedance composite noise suppressors significantly reduces the noise during exhaust emissions.
6Power cables are connected using a fixed junction box structure, directly linking outside the box.
Additionally, the structure of the soundproof door is similar to that of the soundproof enclosure; the windows are double-glazed, and the doors and windows are sealed tightly with the soundproof enclosure, effectively sealing in the noise.
