60kw Diesel Generator Center
Features of Automated Control Systems
Maintaining uninterrupted and reliable power supply. The diesel generator set automatic control system can accurately and swiftly adjust the operation of the diesel generator set. In the event of abnormal conditions, the automatic control system can make normal judgments and handle them promptly, issuing corresponding alarm signals and emergency shutdown to prevent damage to the generator set. Additionally, it can automatically start the backup generator set, shorten the power outage time of the power grid, and ensure the continuity of power supply.
During operation, diesel generator sets, especially high-power models, require frequent checks for loose foot bolts, generator set end covers, bearing caps, and the reliability of grounding devices. If the diesel generator set exhibits increased vibration, louder noise, or strange odors, shut it down immediately to identify and resolve the issue. Ensure that the operating current of the diesel generator set does not exceed its limits; overloading can occur due to excessive load, low voltage, or mechanical jamming. Therefore, during operation, pay attention to the smooth and reliable operation of the transmission mechanism; the concentricity of couplings; and the flexibility of gear transmission. If any jamming is detected, stop the generator set immediately to resolve the fault.
Small QuietTO62000ETDetailed specifications
I. Technical Specifications
Rated OutputKW 60 63
High-powerKW 63 65
Rated FrequencyHz 50 60
Rated VoltageV 380/220
Rated Speedrpm 1500 1800
No Chinese content provided, original return: No content to translate. Numbers: Single-phase; three-phase
Power Factor: 0.8/0.9
Adjustment Method: AVRAutomatic Voltage Regulator
Noise Level LP7m:65-75db
Frequency Adjustment: (%):≤±0.5(Steady State)
Voltage Fluctuation: (%):≤±0.5
Engine Technical Specifications:
Power Model: YOTOTI5200
Please provide the Chinese content that needs to be translated into American English. N/A： BrandOur drive
Vessel 径：径 4*125*136MM
Cylinder Arrangement: Inline
Cylinder Quantity: 4Cylinder
Cooling Method: Closed-loop water circulation cooling
Fuel Supply Method: Direct喷射
Speed Control Method: Electronic Speed Control
Inlet Method: Natural Aspiration
Oil Type: 15W/40CD
Fuel Model: 0#Light Diesel Oil
Diesel Fuel Tank 200L
Engine Oil Consumption:206g/kw•h
Lubricant Oil Tank17L
Motor Technical Specifications:
Motor Model: TO62000ET
Rated Power: 60KW
Rated CurrentA 273/158
Contact Method: Three-phase four-wireYForm-fitting method
Protection Level: IP22
Insulation Grade: HLevel
Other Configurations:
Aircraft Configuration DimensionsL×B×H）：2400*1000*1400
Aircraft Weightkg）：900
The low oil pressure alarm system can automatically shut down the engine.
Electric start ensures rapid engine startup.
The new automatic voltage regulator ensures stable voltage output.
No content provided for translation.Compliance Standards:
International Standard CertificationISO9001：2000
Industry Execution StandardsGB/T2820.5-09
ThreeConfiguration
Standard Configuration
Industrial Water-Cooled Diesel Engine
Single-bearing drip-proof generatorIP22 Protection, Insulation Class H
50℃ Environmental Temperature Radiator, Double-layer Heat Dissipation
Electric Start
Standard Air Filter
Out-of-line switch
Steel base with vibration-dampening pads
Silencer Device
Battery Storage
Warranty Period:
(Domestic) Post-crew adjustment and acceptance testing passed12 months or 1,000 cumulative hours, whichever comes first.
Due to product quality issues, we offer free repairs or replacements! Lifetime paid service available! (Warranty does not cover consumables, frequently used parts, damage caused by human error, or neglect in maintenance.)
In case of factory adjustments, the original factory warranty terms will apply!
Power diesel generators should select motors based on the nature and size of the load. Choosing a motor with excessive capacity not only fails to utilize the equipment's full capacity but also results in poor economic performance due to the motor's long-term operation at low load, which is不利于 energy conservation. For reversible operating DC motors, selecting a larger capacity also means an increase in the motor's rotational inertia, which degrades the dynamic characteristics of the drive system, leading to time wastage and reduced efficiency. Therefore, from the perspectives of energy conservation and ensuring safe operation, it is imperative to choose the appropriate motor rationally.
