35kw DaZe Power Diesel Generator
When a generator set is not used for an extended period, it should be stored properly. The method is as follows:
1Perform external cleaning, release lubricant, clean the crankcase, and then apply heated lubricant to the crankcase.
2Start the unit and run it empty2~3Minutes, shutdown and drain lubricant.
3Drain the fuel from the tank and then thoroughly flush the fuel out of the fuel filter and carburetor.
4Remove spark plug, inject10mlApply lubricant to the engine's crankshaft before rotating it.3~5Turn until it feels heavy, then stop pulling.
5Industrial Vaseline is applied to the uncoated metal surface, then wrapped with paraffin paper, and finally covered with a cloth over the gasoline engine.
6The exhaust outlets are wrapped securely with oil paper and rope (to prevent foreign objects and moisture from entering).
The electric start motor should have its battery removed and charged. Store in a dry place and charge once a month; do not expose the battery to excessive heat or cold (below freezing temperatures).0Or higher30°C）。
No Chinese content provided, so no translation is necessary. No: TO35000ETX
No Chinese content provided.:Generator specifications:
1.Rated Power:35KW
2.StandbyPower: 36KW
3.Rated Frequency:50HZ
4.Rated Voltage:220/380V
5.Starting Method: Electric Start
6.Institution Type: Silent
7.Power Factor:0.8/1.0
8.Volume: Unit/Three-phase
9.Rare Earth Permanent Magnet Motor
No Chinese content provided..Engine specifications:
1.Engine Brand:Mini-Silent
2.Engine Model:TO-WP35
3.Cooling Method: Water Cooling
4.Rated Speed:1500r/min
5.Cylinder Structure: Direct Injection, Four-Cylinder, Inline, Water-Cooled
6.Combustion System: Direct Injection
7.Inlet Method: Natural Aspiration
8.Insulation Grade:HNo Chinese content provided.
9.Control Device:ECU
10.Silencer Device: IndustrialSilencer Device
11.Speed Regulation Method: Mechanical Speed Regulation
12.Fuel Tank Capacity:50L
13.Overload Capacity:100%
14Compression Ratio:19:1
15Camshaft Special: Counterclockwise
Three:Complete Machine Specifications:
1.Fuel Gauge: N/A
2.Voltage Meter: Available
3.LED Indicator: On
4.Overload Protection:
5.Oil Control Device: Available
6.Machine Fuel Consumption:200g/kw.h(loaded)
7.Work Hours:8-10H
8.Noise Level:62-72db
9.Machine Weight:490/590kg
10.No Chinese content provided.: 1450*870*1000(Without Wheels)
11.After-Sales Service: Dai泽 Original, Nationally Guaranteed Warranty
No content provided for translation..Random Accessories:
1.Manual, warranty card, certification of conformity, connection cables, random small tools, tool kit
Specific methods for machine introduction:
1To maintain the cleanliness of the generator set, if dust, water stains, and other debris enter its interior while in operation, they can act as a short-circuit medium, damaging the insulation of the wires, causing inter-turn short circuits, increasing the current, raising the temperature, and ultimately burning out the generator set.
2Stay vigilant and attentive; immediately shut down upon detecting any strange odors and investigate for oscillation, noise, or abnormal smells in the generator set. During operation, especially for high-power generator sets, it is crucial to frequently check if the foot bolts, generator set end covers, and bearing covers are loose, as well as the reliability of the grounding equipment.
3Regularly inspect and maintain the control equipment of the generator set to ensure its normal operation. The condition of the generator set's control equipment plays a decisive role in the normal startup of the generator set.
4Ensure regular checks for the balance of the three-phase current in the generator set. For three-phase asynchronous generator sets, the difference between any phase's current and the average of the other two phases should not exceed...10%This ensures the generator set operates properly.
