10kW Diesel Generator Pump

Before selecting a diesel generator set, it's important to first determine what type you want, such as whether it's electrically or manually started, single-phase or three-phase, and so on.

Key considerations include mechanical and electrical performance, the application of the unit, load capacity and variation range, and automation features.

1Applications of Diesel Generator Sets. Diesel generator sets are versatile and can be used for primary, backup, and emergency power needs.

Wait3Different applications require diesel generator sets with varying specifications.

2Diesel generator set load capacity. The load capacity and the range of load variation should be selected based on different applications, determining the single unit capacity of the diesel generator set and the backup diesel generator set capacity.

3Diesel generator set operating environmental conditions (mainly referring to altitude and climate conditions)

4Selecting Diesel Generator Sets

5When purchasing a diesel generator set, pay attention to the generator and excitation method.

6Selection of Automation Features for Diesel Generator Sets

Model:TO14000ET

Generator specifications

Rated Power: 10KW

Standby Power 11KW

Rated Frequency: 50HZ

Rated Voltage: 220/380V

Structural Type: Silent mode

Power Factor: 1.0

Please provide the Chinese content you would like to be translated into American English.    Number: Single/Three-phase

Direct Current Output 12-8.3（V-A）

Engine specifications

Insulation Grade: F

Startup Method: Electric Start

Fuel Model: 0#Or-10#Diesel

Speed Control Method: Automatic Speed Regulation

Engine Brand: Dazai Power

Cooling Method: Air Cooling

Rated Speed: 3000r/min

Cylinder Structure: Dual-cylinder, four-stroke

Combustion System Direct喷射式

Control Device ECU

Silencer Device: Industrial Noise Abatement Equipment

Engine Model TO-2V870F

Fuel Consumption: 205g/kw.h

Fuel Tank Capacity: 28L

Oil Volume: 2.3L

Overload Capacity: 110%/1h

Cylinder Bore*Schedule: 2*80*79mm

Engine Power: 18HP

Compression Ratio: 19:1

           Complete Machine Specifications

Office Hours: 7-12H

Noisedb）7M 60-78

Fuel Gauge: There is no Chinese content provided for translation.

Complete Machine Overload Protection: There is

Automatic Overload Protection: There is

Voltage Meter: There is

Output Indicator There is no Chinese content provided for translation.

Machine Weight: 210/245kg

Dimensions: 1060*610*670mm

Electromagnetic Oil Control Valve There is

Standard configurations for generator sets are as follows:

Voltage, Current, Frequency, Machine Operation Indicators, Cooling Fans, Safety Protection:

Initiate battery and battery starter cables.

Japanese Industrial Standard Noise Suppression Devices, Lower Than Other Brands20%

Optional accessories (additional charge applies)

ATSAutomatic Transfer Device Remote Control Activation

Special Modification-In-car version (double-damping) Custom Edition-Vehicle Version (Double-Sided Muffler)

Execution Standard: International Standard CertificationISO9001：2000 Industry Execution StandardsGB/T2820.1997

To ensure the generator operates normally, there should be no accumulation of water, oil, or debris nearby, and no corrosive gases to avoid damaging the generator's winding insulation.

While preventing moisture and dust, ensure that the generator's normal ventilation and cooling are not affected. Regularly clean the dust and debris within the ventilation channels to maintain unobstructed airflow. The temperature of the cooling air should not be too low to prevent condensation of water droplets on the windings and other electrical conductive devices.

For generators temporarily halted due to reasons, the commutator does not require wrapping protection. However, an insulating cardboard, paraffin paper, or asphalt paper should be placed between the brush and the commutator to prevent the brush from adhering to the surface of the commutator.No Chinese content provided.