Usage Instructions:
1. Determine anchor bolt hole positions according to design requirements, and use a hammer drill, anchor bolt drill, or coal and electricity drill to bore holes, with a depth 80-100mm shorter than the length of the anchor bolt.
2. Utilizing a compressed air pipe to delve deep into the eye socket, clean the rock dust inside the hole through the force of compressed air.
3. The hole diameter requirement is 6-12mm larger than the anchor rod diameter.
4. Insert the drug cylinder into the眼底 using anchor rods, then activate the mixing device for blending. Strictly control the mixing time according to the requirements of the resin anchor adhesive.
After dialing the landline number, place the tray on and tighten the nuts.
