Protective lead doors can effectively block radiation from entering and exiting. There are certain requirements for the installation of radiation protection doors. What should be paid attention to during the installation process? Firstly, the manufacturer must be formal, and before installation, the construction site should be visited to carefully review the location, quantity, and dimensions of the radiation protection doors, and take responsibility for the final quantity and dimensions.

Next is the underlining positioning: Mark the installation position line of the door frame within the opening according to the dimensions, elevation, and opening direction specified in the design drawings. Frame Alignment: After the door frame of the radiation protection door is in place, it should be aligned for verticality, levelness, and diagonals, adjusted to the required installation height differences, and spaced appropriately from the interior and exterior walls, as well as the upper and lower widths of the door frame.

The door frame is temporarily secured with bolts, and the review process must be halted to ensure precise dimensions of the assembly. It is crucial to note that during the installation of the radiation shielding door, the door leaf should be mounted onto the frame after which its position and alignment should be adjusted. Additionally, there are certain issues to be aware of with the door frame installation: before installation, on-site dimension measurements must cease, and the dimensions must be cross-checked and corrected with the drawings and relevant design changes, as well as a technical briefing to confirm the opening direction. The installation of the door frame must strictly adhere to the design and relevant standards.