Traction control is a type of elevator control technology. A system device similar to an "access control" system is installed on the original elevator. The elevator only starts after a card is swiped, transporting the owner to the desired floor.

There are three control methods for the elevator access system, which can automatically identify the type and permissions of IC cards, preventing unauthorized use by individuals without cards. In the event of hardware and software failures in the controller, the elevator can immediately revert to a free state, allowing users to simply press the floor selection button to operate the elevator, and it also features联动 with the emergency fire switch. The unique embedded keypad replaces the IC card operation. Residents can change their passwords independently, without the need for management involvement, reducing cumbersome administrative tasks and enhancing security.

Level Control: Direct card swipe access is restricted to floors for which the card is authorized; no additional floor selection buttons are required.

2. Floor Control: Card swipe to unlock all buttons, press the floor button within the set time to reach your destination, and the elevator will arrive at the desired floor.

3. Elevator Access: Swipe a card outside the elevator car to enter and unlock the elevator usage permission.

What are the precautions for using elevators?

Prohibit the carrying of flammable, explosive, or corrosive hazardous materials in elevators.

Please do not sway side to side inside the elevator.

3. Smoking is prohibited inside the elevator car to prevent fires.

When passengers are trapped inside the elevator car due to power outages, malfunctions, or other reasons, they should remain calm and promptly contact the elevator management personnel.

Do not force open the car door when passengers are trapped inside to prevent injury or death from amputation or falling.

If passengers notice any abnormal operation of the elevator, they should immediately stop using it and promptly notify maintenance personnel for inspection and repair.

7. Please be mindful of the load capacity when using the passenger elevator. In case of overloading, automatically reduce the number of staff to avoid any danger caused by overloading.

Do not rush into the elevator or stand against the lobby car door when the elevator doors are about to close.

9. Upon entering the elevator, do not stand with your back to the car door to avoid falling when it opens. Do not exit the elevator either. When entering or exiting, be mindful of whether the floor is even.